Care and Cleaning
Disconnect the power supply before cleaning and maintenance.
●
Do not splash water on the units for cleaning, as electric shocks may occur.
●
?
Wipe the units with a dry soft cloth, or a cloth slightly moistened with water or cleaner (not with
●
?
volatile liquid such as thinner or gasoline).
Remove the front panel.
the dirty part of front panel.
Note: Do not immerse the front panel into water so as to protect
diagram on the front panel.
Note:Do not touch
Take down the air filter
①
Lift up the front panel.
Pull the air filter downwards to take it off,
as shown in
Fig.(a, b) .
Clean the air filter
②
Use a vacuum cleaner to remove dust.
If the filters are dirty, wash them with warm water
and mild detergent.
Dry the filters in the shade.
Note: Never use water above 45
filter as it may cause deformation or discoloration.
Reinstall the
③
Reinstall the filters along the direction of arrowhead.
Close the panel.
Cleaning the Front Panel
Dip a piece of cloth into the water colder than 45
Cleaning the Air Filter (every 3 months)
the fin of indoor unit during cleaning to avoid personal injury.
℃
air filter
Caution
microprocessor
to clean the air
12
and dry it . Then wipe
℃
components and circuit
(
a)
(
b )