Zoom Gear Installation
1.
Install camera body in housing (without lens).
2. If necessary, remove black dust cap from housing port hole
before installing Zoom Gear. Rotate the Zoom Gear Retainer Tool
counterclockwise to remove Retainer.
3. Install components as shown, Diagrams A and B. Tighten Zoom
Gear Retainer clockwise so Retainer is snug. DO NOT overtighten.
4. Zoom Gear is a friction fit to the lens. Install lens and test zoom
function - Diagram C.
5. Attach Port.
Diagram B
©
2018 Ikelite Underwater Systems
ikelite.com
5509.32_Zoom_Gear_Sony_12-24_F4G_1-0218
Diagram C