6
Install the:
a
Front bezel
b
Side cover
7
Follow the procedure in
Minnemodul
Removing memory module
1
Follow the procedure in
2
Remove the:
a
Side cover
b
Front bezel
c
HDD assembly
d
Hard drive and optical drive module
3
To remove the memory module:
a
Pry open the retention tabs from both sides to lift the memory module from the connector [1].
b Remove the memory module from the system board [2].
34
Demontering og montering
After working inside your
computer.
Before working inside your
computer.
Need help?
Do you have a question about the OptiPlex XE3 Small Form Factor and is the answer not in the manual?
Questions and answers