Vetmate Blood Glucose Meter; Vetmate Blood Glucose Meter Display - i-SENS VetMate User Manual

VetMate Blood Glucose Meter

Data Port
Used to transfer data
from the meter to
a computer with
a cable
▲ Button
Selects or changes
information
S Button
Turns the meter on/
off and confirms
menu selections
Test Strip Port
Insert test strip here
Note:
• The cable for data management software can be ordered
separately. Please contact Customer Service: 1-800-429-
5001 Mon–Sat, 9 am–9 pm EST.
• The unit of measurement is fixed and it cannot be changed
by the user.
12 www.i-sens.com

VetMate Blood Glucose Meter Display

Display Segment Check
It is recommended to check if the display screen on the meter
matches the illustration below every time the meter turns on.
Do not use the meter if the display screen does not exactly
match the illustration as the meter may show incorrect results.
mem
Display
Appears when test
Shows results,
results stored in
messages
the memory are
displayed
Ejection Button
alarm
Slide down to
Appears when the
discard the used
time alarm has been
test strips
set
▼ Button
Hypoglycemia
Selects or
changes symbol
information Appears when
the test result is
below the pre-set
hypoglycemic level
Mute symbol
Appears only when
the sound is set to
OFF
check
Appears when the
control solution test
results are saved or
displayed
Test results
Blood insertion
symbol
Indicates the meter
is ready for the
application of a drop
of blood or control
solution
Animal symbol
Shows the set
Month Day Hour Minute
animal (dog/cat)
mode, Can be
changed in SET mode
Battery symbol
or immediately prior
Indicates meter
to blood insertion
battery is running
low and needs to
be replaced
www.i-sens.com 13