not exceed 880V
It would influence the machine performance and may cause machine
●
damage if the installation environment is selected improperly.
Do not install the Power Pack in inflammable, explosive place or
●
inflammable, explosive materials storage place.
Do not install the Power Pack in explosive dangerous place.
●
Do not install the Power Pack in place where is vulnerable to lightning
●
strike.
Do not install the Power Pack in place where have much salt fog.
●
When running the Power Pack, please ensure good ventilation.
●
Power Pack should be installed erectly, and ensure the heat sink is
●
without shelter.
Electrical connections
Warning!
All the operation and wiring work should be operated by professional
●
electrical or machine engineer.
Please do not close any breakers before all the equipment are not fully
●
connected well.
Notice!
All the electrical installation must meet the electrical installation standard
●
of local and country.
In order to ensure safe running, proper grounding, using appropriate
●
conductor size and providing short circuit protection are required.
Connection cable must select suitable specification, firm connection and
●
good insulation.
Running
Danger!
Please do not plug any connectors under Power Pack charged state!
●
Please do not open the cover plate under Power Pack charged state!
●
2