Table of Contents
Advertisement
4.4 Installation of Power Pack
Step 1: Fix four hangers to the four corners of Power Pack, shown as
sketch map as below after fastening.
Hangers on the top of
PowerPack
Step 2: Drill holes in the selected installation position according to the
size and shape of installation bracket; suggest drill Diameter
10+1/0, depth 60+5/-0.
Through
expansion
bolt to fix the bracket
to the wall
Figure 4-4 JNPH3AR-S Installation hole position figure
Step 3: Hang the Power Pack four hangers to the fixed expansion bolt,
tighten bolt with wrench.
Figure 4-3 Power Pack hangers sketch map
Hangers at the bottom
of PowerPack
12
Advertisement
Table of Contents
