Table of Contents
Advertisement
Noted!
PV+ waterproof terminals are on top of the panel, while the lower are
PV-
.
Warning!
Before connecting the PV array to the Power Pack, ensure its earth
impedance is not less than 1Mohm.
Warning!
The positive and negative polarities of PV arrays cannot be inversely
connected to Power Pack.
2． AC INPUT terminals connection
AC INPUT terminals adopt M25 waterproof terminals. The operation
method is the same as terminal disassembling method of the DC INPUT
side. Putting AC input cable through the waterproof terminals block, then
accessing three-phase AC input and grounding wire in accordance with
the "U, V, W, PE" logo.
Figure 5-2: Power Pack's AC input wiring diagram
3． DC Output terminals connection
Refer to DC input terminals connection.
AC INPUT
terminal Blocks
Advertisement
Table of Contents
