Use Your Soundbar; Adjust The Volume - Philips 5000 Series User Manual

Option 3: Connect to HDMI (ARC)
Socket
Your Soundbar supports HDMI with Audio
Return Channel (ARC). If your TV is HDMI
ARC compliant, you can hear the TV audio
through your Soundbar by using a single
HDMI cable.
1
Using a High Speed HDMI cable,
connect the HDMI OUT (ARC)-TO TV
connector on your Soundbar to the
HDMI ARC connector on the TV.
• The HDMI ARC connector on the
TV might be labeled differently. For
details, see the TV user manual.
2
On your TV, turn on HDMI-CEC
operations. For details, see the TV user
manual.
NOTE: The TV audio output must be
set to PCM.
4 Use your
SoundBar
This section helps you use the SoundBar to
play audio from connected devices.
Before you start
• Make the necessary connections
described in the Quick Start Guide or
download the User Manual from
www.philips.com/support.
• Switch the SoundBar to the correct
source for other devices.

Adjust the volume

1
Press +/- (Volume) to increase or
decrease a volume level.
• To mute sound, press .
• To restore the sound, press
again or press +/- (Volume).
Volume indicator
• When you press the volume+ to
increase the volume, the SoundBar's
indicator will blink red, and the volume
will return to the normal state after
it reaches the maximum with the
SoundBar's indicator showing solid red
for 2 seconds.
• When you press the volume- to
decrease the volume, the SoundBar's
indicator will blink red, and the volume
will return to the normal state after
it reaches the minimum with the
SoundBar's indicator showing solid red
for 2 seconds.
EN 9