Mp3 Player; Play Audio Through Bluetooth - Philips 5000 Series User Manual

MP3 player

Connect your MP3 player to play your
audio files or music.
What you need
• An MP3 player
• A 3.5mm stereo audio cable.
1
Using the 3.5mm stereo audio cable,
connect the MP3 player to the AUX IN
connector on your SoundBar
2
Press AUX on the remote control.
3
Press the buttons on the MP3 player
to select and play audio files or music.
10 EN

Play audio through Bluetooth

Through Bluetooth, connect the SoundBar
with your Bluetooth device (such as an
iPad, iPhone, iPod touch, Android phone,
or laptop), and then you can listen to the
audio files stored on the device through
your SoundBar speakers.
What you need
• A Bluetooth device which supports
Bluetooth profile A2DP and AVRCP,
and with Bluetooth version 4.2 or
above.
• The operational range between the
SoundBar and a Bluetooth device is
approximately 4 meters (13 feet).
1
Press on the remote control to switch
the SoundBar to Bluetooth mode.
The soundbar's indicator blinks
blue.
2
On the Bluetooth device, switch on
Bluetooth, search for and select Philips
TAB5105 to start connection (see the
user manual of the Bluetooth device
on how to enable Bluetooth).
During connection, the soundbar's
indicator blinks blue.
3
Wait until the soundbar's indicator
becomes solid blue.
If the connection fails, the
indicator blinks continually at a
lower rate.
4
Select and play audio files or music on
your Bluetooth device.
• During play if a call is coming,
music play is paused.
• If your Bluetooth device supports
AVRCP profile, on the remote
control you can press
to a track or press
resume play.
5
To exit Bluetooth, select other source.
• When your switch back to
Bluetooth mode, Bluetooth
connection remains active.
/ to skip
to pause/