Auto Standby; Apply Factory Settings; Update Software; Wall Mount - Philips 5000 Series User Manual

Note
• T he music streaming may be interrupted
by obstacles between the device
and Sound Ban such as wall, metallic
casing that covers the device, or other
devices nearby that operate in the same
frequency.
• I f you want to connect your SoundBar
wrth another Bluetooth device, press
and hold on the remote control to
disconnect the currently connected
Bluetooth device.

Auto standby

When playing media from a connected
device, this product automatically
switches to standby after 15 minutes of
button inactivity and no audio play from a
connected device.

Apply factory settings

You can reset your SoundBar to the default
setting mode.
1
In AUX mode, long press the power key
of the remote control for 5 seconds.
The factory settings is restored.

Update software

To continually improve the product,
software upgrade may be offered. Visit
www.philips.com/support to check if the
latest software version is available.

5 Wall mount

Note
• I mproper wall mounting may result in
accident, injury or damage. If you have
any query, contact Consumer Care in your
country.
• B efore wall mounting, make sure the wall
can support the weight of your SoundBar.
Screw length/diameter
Depending on the type of wall mounting
your SoundBar, make sure that you use
screws of a suitable length and diameter.
3.0-3.5mm/0.12"-0.14"
>25mm/0.98"
See the illustration in the quick start guide
on how to wall mount the SoundBar.
1) Drill two holes on the wall.
2) Secure the dowels and screws in the
holes.
3) Hang the SoundBar on the fastening
screws.
4mm/
0.16"
EN 11