Troubleshooting; Faqs - Geo Trio User Manual

Troubleshooting

Trio
. User manual
Troubleshooting

FAQs

My Display is not showing any readings
If your Display shows Awaiting data, the banner bar is red, or there is no l
symbol in the banner bar, this could be because your Display is out of range
and is not able to communicate with the smart meter.
Try moving your Display closer to the smart meter. If problems persist,
please contact your supplier.
My Display's screen turned off
Your Display may be off for a number of reasons:
Under > Display, if you have selected Sleep to be Always or the
Settings
Sleep timer setting, then the screen will switch off when you are not using it
(or it is scheduled to sleep). Touch the screen or any button and the screen
should come back on.
See 'Display' on page 32 for more information on the settings.
Display
If the Display is being powered by batteries, then it may be that they have
run flat. Either connect your Display using the supplied power adapter or
replace the batteries.
The Display will run for approximately 4 hours whilst on batteries allowing
you to carry it around the home to learn how different appliances work. It is
not intended for prolonged use.
38