Prepay; Enable Supply; Top-Up (20 Digit Code) - Geo Trio User Manual

Prepay (prepayment meters only)
Trio
. User manual

Prepay

(prepayment meters only)

Enable supply

On some meters, the electricity supply can be enabled (restored) from the
Trio without having to press a button on the meter. If you meter supports
this capability, it will automatically appear in the Prepay menu when the
supply is ready to be enabled.
Unfortunately, for safety reasons, gas meters cannot be enabled (restored)
from the Trio.

Top-up (20 digit code)

The Trio can be used to top-up the meter(s). In the Prepay menu select Top-
up, if both meters are in prepayment mode, then select the fuel to top-up.
You can top-up from the home screen prepayment tab by pressing the fuel
in prepayment mode - see "Prepayment screen" on page 15.
Once the code has been entered and sent, a confirmation screen will
appear as shown above.
If you have topped-up via another source, then this will not
generate a top-up alert message on your Trio.
26