Installation; Cbk-Sd01 Configuration; Applicable Models For Installation; Installation Procedure - Sony CBK-SD01 Installation Manual

1-1. CBK-SD01 Configuration

The CBK-SD01 consists of the following:
. DIF-147 board
. B2 x 4
. Precision screw P1.4 x 3.5
. Installation Guide
. Installation Manual
In addition to the Installation Manual, the following manuals are available.
. PDW-510/510P/530/530P Operation Manual (Supplied with PDW-510/510P/530/530P)
This manual is necessary for application and operaion of PDW-510/510P/530/530P.
Part number: 3-205-742-0X
. MSW-900/900P Operation Manual (Supplied with MSW-900/900P)
This manual is necessary for application and operaion of MSW-900/900P .
Part number: 3-206-082-0X
. PDW-510/510P/530/530P, CBK-SD01 Maintenance Manual (Available upon request)
This manual intended for use by trained system and service engineers describes (the circuit overview,
character display functions, the main part replacements, electrical alignment, parts list, semiconductor
pin assignments, block diagrams, schematic diagrams, board layouts, etc.) required for parts-level
service.
For obtaining, contact your local Sony Sales Office/Service Center.
Part number : 9-968-032-71

1-2. Applicable Models for Installation

. PDW-510/510P/530/530P
. MSW-900/900P

1-3. Installation Procedure

Outline of the installing the CBK-SD01 to the PDW-510/510P/530/530P, MSW-900/900P is listed as
follows. For the details of the installation work, refer to the respective sections.
Installation procedure
1. Opening the Inside Panel
2. Installing the CBK-SD01 (DIF-147 Board)
3. Closing the Inside Panel
4. Operation Check
Select the output signal with the use of menu.
Confirm that the SDI singal is output from the
VIDEO OUT terminal.
CBK-SD01
Section 1

Installation

(1)
(2)
(2)
(1)
(1)
Sections describing the detailed procedure
1-4. Opening and Closing the Inside Panel
1-5. Installing the CBK-SD01 (DIF-147 Board)
1-4. Opening and Closing the Inside Panel
1-6. Select Output Signal
1-1 (E)