Sony CBK-SD01 Installation Manual page 8

2. Insert the connector (CN2) of the CBK-SD01 (DIF-
147 board) to the connector (CN2) on the DCP-36
board (the DCP-32 board for MSW-900/900P) and fix
it to the supports with the two screws supplied.
n
Standard tightening torque value :
Screw P1.4 x 3.5
0.1 N.m (1.0 kgf.cm)
Screw B2 x 4
0.19 N.m (1.9 kgf.cm)
3. Connect a coaxial cable that is removed in step 1, to
the connector (CN1) on the CBK-SD01 (DIF-147
board).
PDW-510/510P/530/530P is shown.
Supports
1-4 (E)
DCP-36 board
CN2
Coaxial cable
CN2
CN1
Supplied screws
(B2 x 4)
CBK-SD01
MSW-900/900P is shown.
DCP-32 board
CN3
Supports
CN1
CN2
Coaxial cable
Supplied screws
CBK-SD01
(P1.4 x 3.5)
CBK-SD01