CONCORD CNK4242WPA-A Manual page 8

Chapter 4: Wireless NVR Starting Up
4.1 Start Wizard
The Startup Wizard will help configure the system and get the NVR working quickly.
4.1.1 Start Wizard
Click the Start Wizard to proceed to the next step
4.1.2 Network Configuration
If you have connected your NVR to your network, the NVR will need to identify itself on the network with an IP
address. In most cases, you will be able to simply tick the DHCP box so your network router automatically assigns
the IP Address.
If your network requires you to manually assign an IP address you will need to perform the steps on the next page.
8