Cloud - CONCORD CNK4242WPA-A Manual

5.5.3 Cloud

This menu allows you to see what is happening on your camera site anytime, It can upload the captured pictures to
Dropbox at normal time, or when motion detection happens.
Cloud Storage: Enable to allow cloud settings
Cloud Type: Only Dropbox cloud storage is supported currently
Channel: Select the channels where you want to upload the snapshots to Dropbox
Alarm Detection: Enable if you want to upload snapshots to Dropbox when the camera detects a motion
Drive Name: Enter the cloud storage name for your Wireless NVR
Activate Cloud: Click to activate the function. An activation email will be sent to the Receiver email account
Process to start uploading the snapshots
1) To use the cloud backup, you need to register your email first. For the detail, please refer to the page 35.
2) Register an account on https://www.dropbox.com/.
3) Configure network to ensure NVR is under network.
4) Configure Cloud: Enable Cloud and set the channel. Enable Motion Detection to have it capture pictures when
motion detection happens.
5) Driver Name refers to the name created in the folder of Dropbox and the name can be defined by the user, e.g.
1080P-SNW204. The folder is to store captured pictures from the NVR.
6) Click [Active Cloud] to activate Cloud and Email for the user verification will be sent. Click the link in the email
and then log in to your dropbox account, and click permit. NVR cloud storage function will be activated. If you
have logged in your dropbox account before Cloud storage activation, then no need to relogin. Just click Permit to
complete the activation. Please finish the activation within 3 minutes. After activation is completed, you can use
the Cloud storage function.
7. Click the icon at the upper-left of dropbox account interface to view the folder made in the 5th step.
8) Open the Dropbox folder to view the NVR captured pictures.
39