CONCORD CNK4242WPA-A Manual page 44

5.6.2.1 LIVE-OUT
Choose LIVE-OUT from the Video Output drop-down menu.
SEQ Mode: Select how many video channels you would like to display when your Wireless NVR is in sequence mode.
SEQ Dwell Time: Enter in seconds the maximum length of time you would like to display a video channel in sequence
mode before displaying the next video channel (300 seconds is the maximum).
Output Resolution: Select a display resolution that is suitable for your TV. 1920 x 1080 will suit most TVs.
Scale and Offset: The Wireless NVR supports to adjust the size & position of the display screen to match your
monitor or TV. Click Setup button to adjust.
Cursor Hidden Delay: Click the drop-down menu to select the time your Wireless NVR will hide the mouse cursor
when idle. You can also disable this by selecting "OFF" (password protection will be temporarily disabled).
Cursor Acceleration: To adjust the speed to move the mouse cursor.
Transparency: Click and hold the slider left or right to change how transparent the Menu Bar and Main Menu will
appear on-screen. Adjust accordingly.
Scale: To adjust the size of the displayed screen by
scale.
X Offset: To move the displayed screen to left or right.
Y Offset: To move the displayed screen to up or down.
Click once or long press the left button of your mouse
on the arrow to adjust the size and position, or you can
scroll the wheel of the mouse to adjust. Click the right
button of your mouse to exit, and click Apply to save
your modifications.
44