Motion - CONCORD CNK4242WPA-A Manual

5.1.3 Motion

This menu allows you to configure motion parameters. When motion has been detected by one or more cameras,
your Wireless NVR will alert you to a potential threat at your home. It does this by sending you an email alert with an
attached image from the camera to use as a reference (if this option is enabled) and/or sending push notifications via
the mobile app.
Setup: Click icon into the setup page.
Motion Detection Area: The whole screen is marked
for motion detection (red blocks) as default. If you want
to disable the motion detection on a certain area, click
the grid cursor and then drag the mouse to highlight
the scope to unmark the area into transparent blocks.
After setting is completed, click the right button of your
mouse to return and click Save to make the area setup
effective.
Switch: Enable or disable motion detection.
Sensitivity: Set the sensitivity level. Level 1 the lowest
sensitivity level while level 8 is the highest sensitivity
level.
20