Alarm - CONCORD CNK4242WPA-A Manual

5.1.5 Alarm

Click Alarm button to configure the motion detection alarm function:
Channel: Display channel number
Buzzer: The Wireless NVR can use its internal buzzer to emit an alarm tone. You can set the buzzer duration in
seconds when the motion is detected.
Record: Click
icon and choose which channel(s) you want to record when the motion detection is triggered.
Post Recording: You can set how long after an event occurs that the Wireless NVR will continue to record. The
recommended recording length is 30 seconds but it can be set higher up to 5 minutes.
Show Message: Check the box to display icon on the live view screen when the motion is detected.
Send Email: You can let the Wireless NVR to send you an auto-email when the motion is detected.
Full Screen: If this function is enabled and a motion is detected in a channel, you will see that channel in full screen.
22