Pir - CONCORD CNK4242WPA-A Manual

5.1.4 PIR

Setup: Click icon into the setup page.
Motion Detection Area: The whole screen is marked
for motion detection (red blocks) as default. If you want
to disable the motion detection on a certain area, click
the grid cursor and then drag the mouse to highlight
the scope to unmark the area into transparent blocks.
After setting is completed, click the right button of your
mouse to return and click Save to make the area setup
effective.
Switch: Enable or disable motion detection.
Sensitivity: Set the sensitivity level. Level 1 the lowest
sensitivity level while level 8 is the highest sensitivity
level.
21