Camera Quick Toolbar; Taskbar - CONCORD CNK4242WPA-A Manual

4.2.1 Camera Quick Toolbar

In live viewing, click the left button of your mouse on a connected camera to display the Camera Quick Toolbar.
Click to manually record the channel immediately. If manual recording is in progress, the icon will be red. Click
one more time to stop manual recording.
Click to save a snapshot of the current camera image. Manual Capture must be enabled to use this feature. For
details on enabling Manual Capture, see 5.2.3.1 Capture.
Click to play the latest 5 minutes recording of this channel.
Click to zoom in on the selected channel. When the icon appears, press and hold the left button of your mouse
to drag the area you want to zoom in.
Click to adjust the image colour of the channel. You can adjust the HUE, BRIGHT, CONTRAST & SATURATION of
the image.
To switch the live view video stream between HD & SD. HD is mainstream live view, SD is substream live view.
Click to enter pairing.

4.2.2 Taskbar

Click to open the Start Menu
Click to choose different layouts for live view
Click to start viewing channels in a sequence
Quick playback. You can choose to play the latest recording for all channels from the beginning of the day, or
you can choose the playback from the last 5s, 10s, 30s, 1Min, 5Min.
Click to switch all IP channels between mainstream and substream (for live view resolution)
Click to switch among real-time, balanced, or smooth view. The view effect modes affect only the live view
video quality by bitrate and frame rate but do not affect the recording quality.
This icon will appear if the network is disconnected.
To start or stop Manual Record and Manual Alarm.
To view system information, channel information, record info and network state.
14