SandenVendo V21 Series Service Manual
Hide thumbs Also See for V21 Series:

Advertisement

Parts & Service Manual
For ALL V21 Identified Equipment
SandenVendo America, Inc.
10710 Sanden Drive, Dallas, TX 75238
T: 800-344-7216
T: 214-765-9066
www.vendoco.com
F: 800-541-5684
F: 214-340-8029
FOR TECHNICAL ASSISTANCE,
PLEASE CALL:
1-800-344-7216 EXT-1036

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the V21 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SandenVendo V21 Series

  • Page 1 Parts & Service Manual For ALL V21 Identified Equipment SandenVendo America, Inc. 10710 Sanden Drive, Dallas, TX 75238 T: 800-344-7216 F: 800-541-5684 FOR TECHNICAL ASSISTANCE, PLEASE CALL: T: 214-765-9066 F: 214-340-8029 1-800-344-7216 EXT-1036 www.vendoco.com...
  • Page 2: Table Of Contents

    V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230212 TABLE OF CONTENTS SAFETY SECTION ……………………………………………… Pages S-1 – S-15 A COMMITMENT TO SAFETY ………………………………………… Page S-2 VENDOR INSTALLATION …………………………………………………. Pages S-3 – S-6 ELECTRICAL HAZARDS …………………………………………………….. Pages S-7 – S-8 MECHANICAL HAZARDS ………………………………………………….
  • Page 3: Pages

    V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230212 SET-UP & CODE DESCRIPTION ……………………………………….. Pages P4-3 – P4-12 12.3 WIRING DIAGRAMS …………………………………………………. Page P4-13 – P4-14 CABINET PARTS .……………………………………………….. Pages C-1 – C-22 READING A PARTS LIST …………………………………………………… Page C-2 HARDWARE LIST ………………………………………………………………...
  • Page 4 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230212 LIVE DISPLAY OUTER DOOR ……………………………………………. Pages D6-2 – D6-10 LIVE DISPLAY LOCK & TRANSACTION ASSEMBLY ………….. Page D6-11 – D6-12 LIVE DISPLAY INNER DOOR ASSEMBLY ………………………….. Pages D6-13 –...
  • Page 5 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230239 SAFETY Safety | S-1...
  • Page 6: A Commitment To Safety

    SandenVendo America, Inc. has no control over the machine once it leaves the premises. It is the owner or lessor’s responsibility to maintain the vendor in a safe condition. See Section I of this manual for proper installation procedures and refer to the appropriate service manual for recommended maintenance procedures.
  • Page 7: Vendor Installation

    V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230239 SECTION I: VENDOR INSTALLATION A. Vendors are large, bulky machines of significant size and weight. Improper handling can result in injury. When moving a vendor, carefully plan the route to be taken and the people and equipment required to accomplish the task safely.
  • Page 8 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230239 Safety | S-4...
  • Page 9 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230239 SECTION I: VENDOR INSTALLATION (CONTINUED) For Type 1 and Type 2 outlets, test for Grounding and Polarization as follows: 1. With a test device (volt meter or test light), connect one probe to the receptacle’s neutral contact and the other to the live contact.
  • Page 10 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230239 SECTION I: VENDOR INSTALLATION (CONTINUED) I. Door Support (Figure 2) The door support is to ensure that the outer door closes squarely to the cabinet. Raising the door can also ensure proper alignment of the door latch.
  • Page 11: Electrical Hazards

    SECTION II: ELECTRICAL HAZARDS GENERAL SandenVendo America, Inc. vending machines are provided with the appropriate power supply setting for your area. Some models are equipped with step-down transformers, as required. This enables the vending machine to operate on different main voltages. Refer to Section I. E. for information to determine the main power requirements.
  • Page 12 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230239 SECTION II: ELECTRICAL HAZARDS (CONTINUED) B. Servicing with “Power Off” For maximum safety, unplug the service cord from the wall outlet before opening the vendor door.
  • Page 13: Mechanical Hazards

    Always install protective covers and guards when reassembling equipment. WARNING: THIS VENDING MACHINE INCLUDES MECHANICAL EQUIPMENT WHICH CAN BE HAZARDOUS IF IMPROPERLY HANDLED OR SERVICED. USE CAUTION AND CONSULT THE SandenVendo America, Inc. SAFETY MANUAL AND SandenVendo America, Inc. SERVICE MANUAL FOR ADDITIONAL SAFETY INFORMATION. Safety | S-9...
  • Page 14: Refrigeration Hazards

    V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230239 SECTION IV: REFRIGERATION HAZARDS GENERAL Refrigeration systems involve both electrical power and mechanical action. These systems may present any of the potential dangers shown in the sections on electrical and mechanical hazards contained in this manual.
  • Page 15 REPLACED ONLY WITH FACTORY-AUTHORIZED PARTS. A. Service Cord Replacement SandenVendo America, Inc. vending machines are furnished with unique power supply cords. If replacement becomes necessary, consult the appropriate parts and service manual and order the correct replacement cord for the model of vending machine in question.
  • Page 16 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230239 SECTION VII: SUBSTITUTIONS AND MODIFICATIONS (CONTINUED) WARNING: THIS APPLIANCE MUST BE EARTHED. IMPORTANT! The wires in the main leads are colored in accordance with the following code: 110v/120v 220v/240v Green...
  • Page 17: Consumer Safety Warning

    (One such decal is applied on the vending machine.) SandenVendo America, Inc. will supply sufficient decals to be placed on all machines, on request. If you have any questions, contact the Technical Services Department of the SandenVendo America, Inc.
  • Page 18 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230239 AREA ADDRESS PHONE NUMBERS SandenVendo America, Inc. Tel: (800) 344-7216 United States, Canada 10710 Sanden Drive Fax: (800) 541-5684 Dallas, TX 75238-1335 U.S.A. Sanden International Corporation...
  • Page 19 Manual Dublan No. 35 Tel: (52 55) 5272-7904 Mexico Col. Tacubaya, Deleg. Miguel Hidalgo Fax: (52 55) 5273-5949 C.P. 11870 Mexico SandenVendo America, Inc. Tel: (214) 765-9066 Central America 10710 Sanden Drive Fax: (214) 221-7010 Dallas, TX 75238-1335 U.S.A. SandenVendo America, Inc.
  • Page 20: General Information

    V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230247 GENERAL INFORMATION General Information | G-1...
  • Page 21 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230247 GENERAL INFORMATION This manual contains programming, operation, and complete parts and electrical wiring diagrams. The V21 controller is a microprocessor which will permit pricing per selection from 0.00 to 99.99. This machine also has space-to-sales programming as well as energy savings modes.
  • Page 22: Initial Set-Up

    If the power requirements are not properly met, contact a licensed electrician and have the necessary correction made. Should you require additional information, contact the Technical Services Department of the SandenVendo America, Inc. office in your area. General Information | G-3...
  • Page 23 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230247 FIGURE 1 NOTE: The Model number of the vending machine is located on the top, left hand corner of the Do Not use the “BASIC UNIT” number. serial plate.
  • Page 24: Label Installation Chameleon

    V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230247 Figure 2 LABEL INSTALLATION CHAMELEON COIN INSTRUCTION LABEL & PRICE LABEL APPLICATION: Apply labels to a clean and dry surface. Peel backing from label and apply with firm, even pressure.
  • Page 25: Label Installation Trade

    V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230247 LABEL INSTALLATION TRADE COIN INSTRUCTION LABEL & PRICE LABEL APPLICATION: Apply labels to a clean and dry surface. Peel backing from label and apply with firm, even pressure.
  • Page 26: Label Installation Hv3

    V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230247 Figure 7 LABEL INSTALLATION HV3 COIN INSTRUCTION LABEL & PRICE LABEL APPLICATION: Apply labels to a clean and dry surface. Peel backing from label and apply with firm, even pressure.
  • Page 27: Label Installation Hvv

    V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230247 LABEL INSTALLATION HVV A. FLAVOR LABELS Before installing flavor labels, bend the top (removal) tab down. To install flavor labels, insert the two small tabs on the bottom edge of the label into the slots in the selection button. Press the label in near the two upper tabs until the tabs snap into the slots in the upper wall of the selection button.
  • Page 28: Alignment Checks

    The V21 machine is capable of vending a variety of products. For specific information, refer to the product set-up label on the machine inner door or contact the Technical Services Department of the SandenVendo America, Inc. office in your area. Load product evenly. Product is to be loaded differently depending on the type of product being vended.
  • Page 29 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230247 General Information | G-10...
  • Page 30 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230247 FOR V21 MODEL 521 General Information | G-11...
  • Page 31: Vend Mechanism Parts Description

    V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230247 VEND MECHANISM PARTS DESCRIPTION The parts listed below are part of the vend motor mechanism (refer to Figure 7 on page G-10). One mechanism is required per column, except the drop sensor assembly, which is one assembly per machine.
  • Page 32 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230247 General Information | G-13...
  • Page 33: Vend Cycle

    V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230247 VEND CYCLE Several operations take place during the vend cycle: When a selection is made, the coupler and bucket rotate, product is dispensed and the bucket is then reloaded. The sequence of these operations changes slightly when the column’s depth setting is changed.
  • Page 34 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230247 General Information | G-15...
  • Page 35: Programming Hv3 / Chameleon

    V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230255 PROGRAMMING SECTION 12.4 PROGRAMMING HV3 / CHAMELEON 12.4 Programming HV3 / CHAMELEON | P1-1...
  • Page 36 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230255 VEC 12.4 PROGRAMMING OPERATIONS NOTE: Some units may contain a European font display, in which case the “°” symbol will be replaced by the “ß” symbol. Example: 72°F will be 72 ß F. The VEC 12.4 Controller uses a 4-button programming system: Programming Buttons: # 1 –...
  • Page 37 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230255 Diagnostics: See inner door of vendor or Troubleshooting section for errors and how to clear them. Coin Payout: Coin Payout Mode allows the operator to ‘test’ for proper operation of the changer tubes. 1.
  • Page 38 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230255 Test Mode Display: Allows you to verify that all of the characters on the display illuminate. 1. At “Test Mode” press Button 4. 2. Press Button 2 or 3 to scroll until display reads “Test Mode - Display.” 3.
  • Page 39 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230255 Sales Data: This Mode allows you to retrieve historical information regarding the number of units sold by vendor. To clear the individual selection sales data, you must have the MIS Auto Reset in the “Configuration”...
  • Page 40 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230255 Set Depth: This Mode allows you to set the depth of each column. In this mode, you have the option of setting the columns for single, double, triple or quadruple depths. 1.
  • Page 41 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230255 and receive change without first attempting a vend. OFF - The consumer can insert a bill into the validator, press the coin return button and immediately receive change.
  • Page 42: Space-To-Sales

    V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230255 Space to Sales: Allows you to program which column will vend when you choose a desired selection button. There are 6 preset configurations (See inner door label for preset options). You also have the option of doing a custom space to sales.
  • Page 43 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230255 To set the clock: 1. Press Button 4 at the “Set Clock” prompt. You will be able to scroll through the following options by pressing Button 2 or 3. Enable ON/OFF - This will turn the clock timer on or off.
  • Page 44 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230255 5. Press Button 4 to save changes. 6. Press Button 1 to exist and return “Refrigeration” on display. To display the temperature: 1. Press Button 4 when the display reads “Refrigeration.” 2.
  • Page 45 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230255 Fan Mode 2 The refrigeration system shall have an fan mode of operation in which the evaporator fan will be turned on/off based on the number of vended product per unit hour . When the fan mode 2 is activated through the Service Modes the controller shall turn on/off the compressor and evaporator fans, based on the following method.
  • Page 46 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230255 To program the “Discount” feature, you must enter the following information: Start Time - When the discounting begins Start Day Stop Time - When the discounting ends Stop Day Selections Amount –...
  • Page 47 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230255 12.4 Programming HV3 / CHAMELEON | P1-13...
  • Page 48 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230255 12.4 Programming HV3 / CHAMELEON | P1-14...
  • Page 49: Programming Coke Chameleon

    V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230263 12.4 PROGRAMMING COKE CHAMELEON 12.4 Programming Coke Chameleon | P2-1...
  • Page 50 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230263 VEC COKE CHAMELEON PROGRAMMING OPERATION NOTE: Some units may contain a European font display, in which case the “°” symbol will be replaced by the “ß” symbol. Example: 72°F will be 72 ß F. The VEC 12.6 Controller uses a 4-button programming system: Programming Buttons: # 1 –...
  • Page 51 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230263 Please note: All modes except Diagnostics, Coin Payout, Tube Fill, Recycler Payout, Recycler Fill, Test Mode are password protected. Diagnostics: Diagnostics Mode displays the error in the vendor to help diagnose the problem. See inner door of vendor or Troubleshooting section for errors.
  • Page 52 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230263 1. Press Button 4 to enter into “Recycler Payout” mode. The display will show the bill denomination and the count of bill that the recycler can dispense. 2.
  • Page 53 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230263 Test Mode Display: Allows you to verify that all of the characters on the display illuminate. 1. At “Test Mode” press Button 4. 2. Press Button 2 or 3 to scroll until display reads “Test Mode - Display.” 3.
  • Page 54 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230263 Cash Data: This Mode allows you to retrieve historical information regarding the money accepted by the vendor. To clear the individual selection cash data, you must have the MIS Auto Reset in the “Configuration”...
  • Page 55 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230263 Set Price: This Mode allows you the option to price each selection to the same vend price, or price each selection button independently. 1. When display reads “Set Price” press Button 4. 2.
  • Page 56 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230263 Timing Features* On - Gives you access to the “Clock” settings and its associated modes. Off - “Clock” settings and its associated modes are hidden. Door Summary On - Sales and cash data are displayed as soon as the outer door is opened or by activating the door switch.
  • Page 57: Space-To-Sales

    V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230263 MIS Reset W/DEX On - MIS data will be reset with a DEX read. Off - MIS data will not be reset with a DEX read. Display Scroll * (Available on version 14 and above) On - The messages will scroll across the display and change.
  • Page 58 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230263 Door Closed Password: Allows the operator to set a 4 digit password to access Sales,Cash Data when the door is closed. The password is limited to 1 through 6. Default password is “4 2 3 1” Please note that this function will not work if any of the password digit is set to 0.
  • Page 59 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230263 MM/DD/YYYY HH:MM - This is the current time and date. Press Button 4 to Set Press Button 2/3 to scroll Set current date in the vendor. Lighting: If the “Timing Features”...
  • Page 60 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230263 Refrigeration: * Features on version 14 and above. If ‘Timing Features’ in Configuration Mode are ‘Off’, you will only have access to the following features: Set Point Temperature: The cabinet temperature during the normal mode.
  • Page 61 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230263 * To change the Temperature Display: 1. Press Button 4 when the display reads “Temperature Display ” 2. The display will read “Temperature Display On” with the current setting displayed. 3.
  • Page 62 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230263 The refrigeration system shall have three types of fan mode operation (energy conservation modes) – This requires fan relay needs to be installed. Fan Mode 0 (Disable) The refrigeration system shall have a fan mode of operation in which the evaporator fan will be turned on/off based on the activation of compressor.
  • Page 63 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230263 Start Day 1 or Start Day 2 Start 1 or Start 2 Stop Time 1 or Stop Time 2 Stop Day 1 or Stop Day 2 Stop 1 or Stop 2 Sales Block 1 and 2: Allows you to program the machine to disable Sales/Lights at regular intervals.
  • Page 64 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230263 ENERGY MANAGEMENT SYSTEM ( EMS ) Energy Management System is a feature that enables the vendor to control the refrigeration and light system in the machine according to the sales pattern in order to achieve the maximum energy efficiency.
  • Page 65 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230263 12.4 Programming Coke Chameleon | P2-17...
  • Page 66 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230263 Figure to show Pre-Programmed Space to Sales: 12.4 Programming Coke Chameleon | P2-18...
  • Page 67: Programming Trade

    V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230298 12.1 PROGRAMMING TRADE 12.1 Programming Trade | P3-1...
  • Page 68 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230298 All programming of the V21 is done in the service mode as indicated in the following steps below. The main service modes are indicated in white text and the sub-modes are indicated in black text.
  • Page 69 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230298 THREE-BUTTON PROGRAMMING All programming of the V21 control board is done in the service mode. To enter the service mode open the vendor door, find the service mode button located on the control board, then press and release the service mode button.
  • Page 70: Set-Up & Code Description

    V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230298 SET-UP AND CODE DESCRIPTION Eror Error Display Mode If selection button two is pressed at the “ ” prompt, the controller will enter the Error Eror Display Mode.
  • Page 71 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230298 SET-UP AND CODE DESCRIPTION (CONTINUED) Jogging the Column Pressing selection button two at the “ ” mode, will enter into the Jog test mode. Upon entry into the Jog test mode the display will show the first summary test, “...
  • Page 72 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230298 SET-UP AND CODE DESCRIPTION (CONTINUED) SALE MIS Data – Sales Mode If selection button two is pressed at the “ ” prompt, the display will show the non- SALE resettable historical amount of units sold by the machine.
  • Page 73 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230298 resettable and begins when the free vend override feature is enabled. Press selection button #3 to exit the mode. 12.1 Programming Trade | P3-7...
  • Page 74 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230298 SET-UP AND CODE DESCRIPTION (CONTINUED) dSEt Depth Setting Mode The purpose of this mode is to enable the controller to set the vending depth for each column. If selection button two is pressed at the “...
  • Page 75 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230298 * The learning mode uses self-adaptive logic to “learn” what the depth setting of the column is, in the event that the control board depth setting isn’t programmed properly. * Available in version 33 and above SET-UP AND CODE DESCRIPTION (CONTINUED) Space-to-Sales Setting Mode...
  • Page 76 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230298 If selection button two is pressed while “ ” is displayed, the display will change to “ ”. SL X C0 1 Pressing selection button one will increase or decrease the column number displayed. Pressing selection button two will actuate the changed connection status of the column number displayed.
  • Page 77 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230298 Pressing selection button one will toggle though the language options. If selection button two is pressed, the display will save the language change and return the display to LAnG.
  • Page 78 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230298 2nd Start time – time lights shut off Str2 Days associated with 2nd start time Hour associated with 2nd start time Hour 2nd End Time – Time lights turn back on End2 Days associated with 2nd end time Hour associated with 2nd end time...
  • Page 79 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230298 0 - the fan mode is disabled and the evaporator will turn on/off with the activation of the compressor 1 - (Fan Mode 1) the evaporator fan will turn off 5 minutes after the compressor fan is turned The second sub-mode, , refers to the Periodic Defrost mode.
  • Page 80 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230298 “ ” – Tuesday “ ” – Wednesday “ ” – Thursday “ ” – Friday “ ” – Saturday “ ” – Sunday “ ”...
  • Page 81 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230298 the discount setting mode as listed below. Pressing selection button three will save the settings and return to the “ ” mode. diSC DISCOUNT SETTING OPTIONS Turns the discount setting On/Off CtL1 Set selection buttons –...
  • Page 82 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230298 If selection button two is pressed at the “ ” prompt, the controller will enter the Free Vend FrEn Enable Option. Upon entry into this program the display will show the current setting “ ”.
  • Page 83 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230298 If selection button two is pressed at the “ ” prompt, the controller will enter the dSCn Discounting Over-Ride Enable Option. Upon entry into this program the display will show the current setting “...
  • Page 84 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230298 12.1 Programming Trade | P3-18...
  • Page 85 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230298 12.1 Programming Trade | P3-19...
  • Page 86 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230298 NOTE: If the outer door is left open for over an hour, the lights, and compressor will become active. In order to over-ride this option, press the door switch one time. 12.1 Programming Trade | P3-20...
  • Page 87 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230328 12.3 PROGRAMMING V21 12.3 Programming HVV | P4-1...
  • Page 88 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230328 VEC 12.3 CONTROL BOARD OPERATIONS NOTE: Some units may contain a European font display, in which case the “°” symbol will be replaced by the “ß” symbol. Example: 72°F will be 72 ß F. The VEC 12.3 Controller uses a 3-button programming system: Row 1 (all selection buttons in top row) –...
  • Page 89 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230328 Diagnostics: See inner door of vendor or Troubleshooting section for errors and how to clear them. Coin Payout: Allows you to payout coin tubes. Press (2) to enter into “Coin Payout” mode. •...
  • Page 90 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230328 Test Mode Display: Allows you to verify that all of the characters on the display illuminate. 1. At “Test Mode” press Button 4. 2. Press Button 2 or 3 to scroll until display reads “Test Mode - Display.” 3.
  • Page 91 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230328 Sales Data: Allows you to retrieve historical information regarding the number of units sold by vendor. To clear the individual selection sales data, you must have the MIS Auto Reset in the “Configuration”...
  • Page 92 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230328 Configuration: There are various options that you can turn ON/OFF. Default options are underlined. Multi-Price ON = All selections can be programmed individually. OFF = All selections will be set to the same price as Selection 1. Timing Features* ON = Gives you access to the “Clock”...
  • Page 93 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230328 Deny Escrow ON = The validator will stack all bills received. OFF = The validator will not stack the bills, rather it will hold them in escrow until a vend is complete.
  • Page 94 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230328 Space to Sales: Allows you to program which column will vend when you choose a desired selection button. There are 6 preset configurations (See inner door label for preset options). You also have the option of doing a custom space to sales.
  • Page 95 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230328 Press (2) at the “Set Clock” prompt. You will be able to scroll through the following • options by pressing (1). o “Enable ON/OFF” - This will turn the clock timer on or off. o “MM/DD/YYYY HH:MM”...
  • Page 96 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230328 To change the setting press (2) and the current set point temperature will begin to • flash. Press (1) to increase or decrease the set point. •...
  • Page 97 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230328 the Service Modes, the controller shall turn off evaporator fan after the delay for 5 minutes after the compressor is turned off. And when the compressor is turned on, the controller shall turn on evaporator fan at same time.
  • Page 98 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230328 Allows you to program the machine to turn off and on at regular intervals. To program the blocking feature, you must enter the following information: Start Time- When the machine turns off Start Days Stop Time- When the machine turns back on...
  • Page 99 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230328 12.3 WIRING DIAGRAM V21 12.3 Programming HVV | P4-13...
  • Page 100 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230328 12.3 WIRING DIAGRAM V21 12.3 Programming HVV | P4-14...
  • Page 101 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230336 CABINET PARTS Cabinet Parts | C-1...
  • Page 102 B. The same number is in the parts lists and ties the two together. PART NUMBER is the part number that has been assigned to a specific part by SandenVendo America, Inc., for easier identification. III. QUANTITY REQUIRED relates to the amount required of a part, or will be indicated by “A/R”...
  • Page 103 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230336 Cabinet Parts | C-3...
  • Page 104 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230336 Cabinet Parts | C-4...
  • Page 105 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230336 ....V802162 SCR 1/4 20x1 3/4 HX THD CUT .
  • Page 106 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230336 Cabinet Parts | C-6...
  • Page 107 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230336 Cabinet Parts | C-7...
  • Page 108 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230336 CABINET ASSEMBLY (CHAMELEON, TRADE, HV3) ITEM PART NO. PART NO. DESCRIPTION (521) (621, 721, 821) HINGE PIN 389071 389071 RAMP 1120387 1120387 LEVELING LEG 1059902 1059902 CONDENSATE PAN 1112023...
  • Page 109 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230336 Cabinet Parts | C-9...
  • Page 110 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230336 CABINET ASSEMBLY (HVV) ITEM NO. DESCRIPTION QTY REQ PART NO. CABINET ASSEMBLY - FOAMED HINGE PIN 389071 RAMP 1120387 LEVELING LEG 1059902 CONDENSATE PAN 1122475 DRAIN TUBE 1088449-1 NUT - DRAIN TUBE...
  • Page 111 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230336 Cabinet Parts | C-11...
  • Page 112 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230336 STACK ASSEMBLY MODEL NUMBER ITEM PART DESCRIPTION PART NO. PART NO. PART NO. STACK CHASSIS ASSEMBLY 1182819 1123591-01 1123591-02 1123591-03 MOTOR COVER 1183009 1123037 1125116 1125116 BACK SPACER ASSEMBLY 1183307...
  • Page 113 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230336 Cabinet Parts | C-13...
  • Page 114 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230336 MECH PLATE ASSEMBLY MODEL NUMBER 721/821 ITEM PART PART PART DESCRIPTION VEND MOTOR ASSEMBLY 1122820 1122820 1122820 FRONT SPACER 1122814 1122814 1122814 VEND BUCKET 1181622 1122815 1122815 CAN CLIP...
  • Page 115 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230336 621 / 721 / 821 R-134a REFRIGERATION ASSEMBLY ITEM DESCRIPTION PART NO. ASY, REFER, R-134a, 115VAC 1194536-1 ASY, REFER, R-134a, 230VAC 1194159-1 Note: For individual components, please refer to refrigeration system part number marked on name plate located on refrigeration system base panel.
  • Page 116 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230336 521 R-134a REFRIGERATION ASSEMBLY ITEM DESCRIPTION PART NO. ASY, REFER, R-134a, 115VAC (SVA) 1183941 ASY, REFER, R-134a, 230VAC (SVA) 1192474 ASY, REFER, R-134a, 115VAC (EMBRACO BUILT) 1186576 Note: For individual components, please refer to refrigeration system part number marked on name plate located on refrigeration system base panel.
  • Page 117 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230336 621 / 721 / 821 C02 REFRIGERATION ASSEMBLY ITEM DESCRIPTION PART NO. ASY, REFER, C02, 115VAC 1201864 ASY, REFER, C02, 230VAC 1220822 Note: For individual components, please refer to refrigeration system part number marked on name plate located on refrigeration system base panel.
  • Page 118 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230336 Cabinet Parts | C-18...
  • Page 119 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230336 POWER BOX ASSEMBLY ITEM PART NO. DESCRIPTION 115V 60Hz 230V 50Hz POWER BOX HOUSING 1236202 1148515 RELAY 1128801 1128801 CLAMP 324099-3 324099-3 CORDSET 1184889 1124938/1124939 CORDSET HVV 1124281 TRANSFORMER...
  • Page 120 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230336 SandenVendo America, Inc. HARNESS QUICK REFERENCE GUIDE V21 VENDORS PART DESCRIPTION PURPOSE Connects motors, temp. sensors, 1122905 Door Harness transformer, drop sensors, and relays to the control board Selection Harness –...
  • Page 121 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230336 Pre-cool – 8 Select harness Live Display Lighting 1124864 Connects the lights to the control board Harness Live Display Selection Connects the selection buttons to the 1087309 Harness –...
  • Page 122 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230336 Light Harness T8 1124865 Complete Connects the lights to Power Box Trade Live Display Light Harness LED 1219302 Complete Connects the lights to Power Box Chameleon Light Harness LED 1217237...
  • Page 123 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230344 DOOR PARTS CHAMELEON Door Parts Chameleon | D1-1...
  • Page 124 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230344 Door Parts Chameleon | D1-2...
  • Page 125 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230344 CHAMELEON TRADE DOOR MODEL NUMBER ITEM HARDWARE DESCRIPTION PART NO. PART NO. DOOR WELD 1149945 1150443 SIGN FACE SIGN CAP, TOP 1114341 1114341 SIGN CAP, BOTTOM 1114341-1 1114341-1 SIGN TRIM, VTL, RIGHT, 72”...
  • Page 126 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230344 Door Parts Chameleon | D1-4...
  • Page 127 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230344 CHAMELEON 3D VISION DOOR MODEL NUMBER 821 VIS HARDWARE ITEM NO. DESCRIPTION PART NO. DOOR WELD 1187325-1 SIGN FACE 1221169 BEZEL, CONSUMER INTERFACE 1143346 BEZEL, COIN RETURN 1170855-1 RAIN GUARD 2000848...
  • Page 128 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230344 Door Parts Chameleon | D1-6...
  • Page 129 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230344 CHAMELEON TRADE / 3D VISION DOOR (CONTINUED) MODEL NUMBER ITEM PART HARDWARE DESCRIPTION PART NO. HINGE – INNER DOOR, MALE 1121287 1121287 MOUNTING BRACKET - CONTROLLER 1124704 1124704 STAND OFF...
  • Page 130 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230344 CHAMELEON TRADE / 3D VISION LOCK ASSEMBLY ITEM DESCRIPTION PART NO. 1143402 BRKT, SECURITY, LOCK 1002392 T-HANDLE 387601 PIN - STUD 1049724 LOCK STUD - QUICKER LOCK 389691 SPRING 388589...
  • Page 131 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230344 Door Parts Chameleon | D1-9...
  • Page 132 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230344 V21 TRADE / 3D VISION INNER DOOR MODEL NUMBER ITEM DESCRIPTION PART NO. PART NO. INNER DOOR ASSEMBLY 134302-160 134302-161 RAIN SEAL, INNER DOOR, 7" 1111732-2 1111732-2 INNER DOOR SEAL...
  • Page 133 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230352 DOOR PARTS CHAMELEON ADA Door Parts Chameleon ADA | D2-1...
  • Page 134 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230352 Door Parts Chameleon ADA | D2-2...
  • Page 135 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230352 CHAMELEON ADA TRADE DOOR MODEL NUMBER ITEM HARDWARE DESCRIPTION PART NO. PART NO. PART NO. PART NO. DOOR WELD 1182341 1190026 1189097 1189232 SIGN FACE SIGN CAP, TOP 389305 1127305...
  • Page 136 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230352 Door Parts Chameleon ADA | D2-4...
  • Page 137 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230352 CHAMELEON ADA TRADE DOOR (CONTINUED) MODEL NUMBER ITEM HARDWARE DESCRIPTION PART NO. PART NO. PART NO. PART NO. HINGE – INNER DOOR, 1121287 1121287 1121287 1121287 MALE MOUNTING BRACKET -...
  • Page 138 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230352 CHAMELEON TRADE LOCK ASSEMBLY ITEM DESCRIPTION PART NO. 1143402 BRKT, SECURITY, LOCK 1002392 T-HANDLE 387601 PIN - STUD 1049724 LOCK STUD - QUICKER LOCK 389691 SPRING 388589 E - RING RETAINER...
  • Page 139 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230352 Door Parts Chameleon ADA | D2-7...
  • Page 140 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230352 V21 ADA TRADE INNER DOOR MODEL NUMBER ITEM DESCRIPTION PART NO. PART NO. PART NO. PART NO. INNER DOOR ASSEMBLY 134302-159 134302-162 134302-160 134302-161 RAIN SEAL, INNER DOOR, 7" 1111732-2 1111732-2 1111732-2...
  • Page 141 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230379 DOOR PARTS CHAMELEON LIVE DISPLAY Door Parts Chameleon Live Display | D3-1...
  • Page 142 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230379 CHAMELEON LIVE DISPLAY DOOR Door Parts Chameleon Live Display | D3-2...
  • Page 143 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230379 CHAMELEON LIVE DISPLAY DOOR MODEL NUMBER ITEM HARDWARE DESCRIPTION PART NO. PART NO. DOOR WELD 1123712 1123713 SIGN FACE SIGN CAP, BOTTOM 1114341-1 1114341-1 SIGN CAP, TOP 1114341 1114341 SIGN TRIM, VTL, RIGHT, 72”...
  • Page 144 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230379 Door Parts Chameleon Live Display | D3-4...
  • Page 145 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230379 CHAMELEON TRADE DOOR (CONTINUED) MODEL NUMBER ITEM HARDWA DESCRIPTION PART NO. PART NO. HINGE – INNER DOOR, MALE 1121287 1121287 MOUNTING BRACKET - CONTROLLER 1077716 1077716 STAND OFF 1121740...
  • Page 146 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230379 CHAMELEON LIVE DISPLAY ASSEMBLY ITEM PART DESCRIPTION FRAME ASSEMBLY 1147716 BACK ASSEMBLY 1147728 BUTTON, ROUND 1149374 WASHER, PLASTIC 1073511 NUT, PLASTIC 1073538 HOLDER, SELECTION SWITCH 1149385 SELECTION SWITCH 368299...
  • Page 147 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230379 CHAMELEON LIVE DISPLAY LOCK ASSEMBLY ITEM DESCRIPTION PART NO. 1143402 BRKT, SECURITY, LOCK 1002392 T-HANDLE 387601 PIN - STUD 1049724 LOCK STUD - QUICKER LOCK 389691 SPRING 388589...
  • Page 148 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230379 Door Parts Chameleon Live Display | D3-8...
  • Page 149 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230379 V21 TRADE INNER DOOR MODEL NUMBER ITEM DESCRIPTION PART NO. PART NO. INNER DOOR ASSEMBLY 134302-103 134302-104 RAIN SEAL, INNER DOOR, 7" 1111732-2 1111732-2 INNER DOOR SEAL 1075678 1075678-1 UPPER PRODUCT RETAINER ASSEMBLY...
  • Page 150 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230387 DOOR PARTS TRADE Door Parts Trade | D4-1...
  • Page 151 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230387 Door Parts Trade | D4-2...
  • Page 152 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230387 V21 TRADE OUTER DOOR – CURVED MODEL NUMBER ITEM DESCRIPTION PART NO. PART NO. OUTER DOOR ASSEMBLY 1148435-007 1148435-008 SIGN CAP – TOP 1014986 1014986 SIGN FACE BUSHING HINGE 388094...
  • Page 153 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230387 Door Parts Trade | D4-4...
  • Page 154 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230387 V21 TRADE OUTER DOOR – 2 BULB LIGHTING MODEL NUMBER ITEM DESCRIPTION PART NO. PART NO. PART NO. DOOR WELD – BLACK 1121232 1123712 1123713 HINGE –...
  • Page 155 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230387 Door Parts Trade | D4-6...
  • Page 156 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230387 V21 ADA TRADE OUTER DOOR - 4 BULB LIGHTING MODEL NUMBER ITEM DESCRIPTION PART NO. PART NO. PART NO. DOOR WELD - BLACK 1121232 1123712 1123713 HINGE - INNER DOOR, MALE 1121287...
  • Page 157 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230387 Door Parts Trade | D4-8...
  • Page 158 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230387 V21 TRADE OUTER DOOR (FLAT) MODEL NUMBER ITEM DESCRIPTION PART NO. PART NO. OUTER DOOR ASSEMBLY SIGN TRIM - TOP/BOTTOM 388284-20 388284-21 SIGN FACE BUSHING HINGE 388094 388094 FLAT WASHER - BOTTOM...
  • Page 159 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230387 Door Parts Trade | D4-10...
  • Page 160 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230387 V21 TRADE LOCK ASSEMBLY ITEM DESCRIPTION PART NO. LOCK ASSEMBLY - QUICKER LOCK 1002635 T-HANDLE 1002392 PIN - STUD 387601 LOCK STUD - QUICKER LOCK 1049724 SPRING 389691...
  • Page 161 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230387 Door Parts Trade | D4-12...
  • Page 162 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230387 V21 TRADE SELECTION PANEL MODEL NUMBER 721/821 ITEM DESCRIPTION PART NO. PART NO. SELECTION PANEL ASSEMBLY-TRADE 2007325-013 2007325-011 CURVE/FLAT (10/8 SELECT) SELLECTION WINDOW & BUTTON 1036203 1036203 ASSEMBLY...
  • Page 163 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230387 Door Parts Trade | D4-14...
  • Page 164 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230387 V21 TRADE INNER DOOR MODEL NUMBER ITEM DESCRIPTION PART NO. PART NO. PART NO. INNER DOOR ASSEMBLY 134302-115 134302-103 134302-104 RAIN SEAL, INNER DOOR, 7" 1111732-2 1111732-2 1111732-2...
  • Page 165 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230395 DOOR PARTS TRADE ADA Door Parts Trade ADA | D5-1...
  • Page 166 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230395 Door Parts Trade ADA | D5-2...
  • Page 167 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230395 V21 ADA TRADE OUTER DOOR – CURVED MODEL NUMBER ITEM DESCRIPTION PART NO. PART NO. OUTER DOOR ASSEMBLY 2010187-319 2010187-320 SIGN CAP – TOP 1014986 1014986 SIGN FACE BUSHING HINGE...
  • Page 168 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230395 Door Parts Trade ADA | D5-4...
  • Page 169 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230395 V21 ADA TRADE OUTER DOOR – 2 BULB LIGHTING MODEL NUMBER ITEM DESCRIPTION PART NO. PART NO. PART NO. DOOR WELD – BLACK 1197768 1197241 1197393 HINGE –...
  • Page 170 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230395 Door Parts Trade ADA | D5-6...
  • Page 171 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230395 V21 TRADE OUTER DOOR - 4 BULB LIGHTING MODEL NUMBER ITEM DESCRIPTION PART NO. PART NO. PART NO. DOOR WELD - BLACK 1197768 1197241 1197393 HINGE - INNER DOOR, MALE 1121287 1121287...
  • Page 172 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230395 Door Parts Trade ADA | D5-8...
  • Page 173 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230395 V21 ADA TRADE OUTER DOOR (FLAT) MODEL NUMBER ITEM DESCRIPTION PART NO. PART NO. OUTER DOOR ASSEMBLY SIGN TRIM - TOP/BOTTOM 388284-20 388284-21 SIGN FACE BUSHING HINGE 388094 388094...
  • Page 174 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230395 Door Parts Trade ADA | D5-10...
  • Page 175 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230395 V21 TRADE LOCK ASSEMBLY ITEM DESCRIPTION PART NO. LOCK ASSEMBLY - QUICKER LOCK 1002635 T-HANDLE 1002392 PIN - STUD 387601 LOCK STUD - QUICKER LOCK 1049724 SPRING 389691...
  • Page 176 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230395 Door Parts Trade ADA | D5-12...
  • Page 177 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230395 V21 TRADE SELECTION PANEL MODEL NUMBER 721/821 ITEM DESCRIPTION PART NO. PART NO. SELECTION PANEL ASSEMBLY-TRADE 2007325-013 2007325-011 CURVE/FLAT (10/8 SELECT) SELLECTION WINDOW & BUTTON 1036203-4 1036203-4 ASSEMBLY...
  • Page 178 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230395 Door Parts Trade ADA | D5-14...
  • Page 179 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230395 V21 ADA TRADE INNER DOOR MODEL NUMBER ITEM DESCRIPTION PART NO. PART NO. PART NO. INNER DOOR ASSEMBLY 134302-166 134302-163 134302-164 RAIN SEAL, INNER DOOR, 7" 1111732-2 1111732-2 1111732-2...
  • Page 180 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230409 DOOR PARTS TRADE LIVE DISPLAY V21 Door Parts Trade Live Display | D6-1...
  • Page 181 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230409 TRADE LIVE DISPLAY DOOR SECTION V21 Door Parts Trade Live Display | D6-2...
  • Page 182 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230409 V21 TRADE LIVE DISPLAY OUTER DOOR – FLAT MODEL NUMBER ITEM DESCRIPTION PART NO. PART NO. OUTER DOOR ASSEMBLY DOOR WELD ASSEMBLY (NON ADA) 1124879 1124890 DOOR WELD ASSEMBLY (ADA)*** 1217569...
  • Page 183 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230409 V21 Door Parts Trade Live Display | D6-4...
  • Page 184 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230409 V21 TRADE LIVE DISPLAY OUTER DOOR - FLAT (CONTINUED) MODEL NUMBER ITEM DESCRIPTION PART NO. PART NO. DOOR WELD - BLACK (NON ADA) 1124879 1124890 DOOR WELD - BLACK (ADA)* 1217569 1217522...
  • Page 185 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230409 V21 Door Parts Trade Live Display | D6-6...
  • Page 186 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230409 V21 TRADE LIVE DISPLAY OUTER DOOR - CURVED MODEL NUMBER ITEM DESCRIPTION PART NO. OUTER DOOR ASSEMBLY DOOR WELD ASSEMBLY (NON ADA) 1124908 DOOR WELD ASSEMBLY (ADA)*** 1217513 SIGN CAP - TOP 1014986...
  • Page 187 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230409 V21 Door Parts Trade Live Display | D6-8...
  • Page 188 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230409 V21 TRADE LIVE DISPLAY OUTER DOOR - CURVED (CONTINUED) MODEL NUMBER ITEM DESCRIPTION PART NO. DOOR WELD - BLACK (NON ADA) 1124908 DOOR WELD - BLACK (ADA)* 1217513 HOPPER ASSEMBLY (NON ADA) 1124162...
  • Page 189 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230409 V21 Door Parts Trade Live Display | D6-10...
  • Page 190 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230409 V21 TRADE LIVE DISPLAY LOCK & TRANSACTION ASSEMBLY ITEM DESCRIPTION PART NO. LOCK ASSEMBLY - QUICKER LOCK 1002635 T-HANDLE 1002392 PIN - STUD 387601 LOCK STUD - QUICKER LOCK 1049724 SPRING 389691...
  • Page 191 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230409 V21 Door Parts Trade Live Display | D6-12...
  • Page 192 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230409 V21 TRADE LIVE DISPLAY INNER DOOR MODEL NUMBER ITEM DESCRIPTION PART NO. PART NO. INNER DOOR ASSEMBLY 134302-80 134302-112 RAIN SEAL, INNER DOOR, 7” 1111732-1 1111732-2 INNER DOOR SEAL 1075678-2...
  • Page 193 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230417 DOOR PARTS HV3 ADA Door Parts HV3 ADA | D7-1...
  • Page 194 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230417 Door Parts HV3 ADA | D7-2...
  • Page 195 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230417 HV3 OUTER DOOR – CURVED MODEL NUMBER HARDWA PART PART ITEM DESCRIPTION 134442- 134442- DOOR WELD SIGN FACE SIGN CAP, TOP 1114341 1114341 SIGN CAP, BOTTOM 1114341-1 1114341-1 SIGN TRIM, VTL,...
  • Page 196 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230417 **NOTE: WHEN ORDERING SIGN FACE, PLEASE PROVIDE FRANCHISE AND STYLE. Door Parts HV3 ADA | D7-4...
  • Page 197 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230417 HV3 DOOR (CONTINUED) ITEM MODEL NUMBER HARDWARE PART PART DESCRIPTION HINGE - INNER DOOR, 1121287 1121287 MALE FLUSH MOUNTING BRACKET 1202557 1213677 - CONTROLLER STAND OFF 1121740 1121740 PCBA VEC 12.1...
  • Page 198 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230417 TRADE LOCK ASSEMBLY ITEM DESCRIPTION PART NO. 1143402 BRKT, SECURITY, LOCK 1002392 T-HANDLE 387601 PIN - STUD 1049724 LOCK STUD - QUICKER LOCK 389691 SPRING 388589 E - RING RETAINER 387600...
  • Page 199 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230417 Door Parts HV3 ADA | D7-7...
  • Page 200 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230417 HV3 INNER DOOR MODEL NUMBER ITEM NO. DESCRIPTION QTY REQ PART NO. PART NO. INNER DOOR ASSEMBLY 134302-160 134302-161 RAIN SEAL, INNER DOOR, 7" 1111732-2 1111732-2 INNER DOOR SEAL 1075678...
  • Page 201 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230425 DOOR PARTS Door Parts HVV | D8-1...
  • Page 202 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230425 Door Parts HVV | D8-2...
  • Page 203 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230425 V21 HVV DOOR FRONT MODEL NUMBER ITEM DESCRIPTION QTY REQ PART NO. PART NO. PART NO. SERVICE DOOR, BLUE, W/O SO/RTV 1112619-50 1112619-35 1112619-37 SERVICE DOOR, BLUE, WITH SO/RTV 1112619-51 1112619-36 1112619-38...
  • Page 204 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230425 Door Parts HVV | D8-4...
  • Page 205 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230425 V21 HVV DOOR BACK MODEL NUMBER ITEM DESCRIPTION PART NO. PART NO. PART NO. RAIN GUTTER 1121204 1121204 1121204 INNER DOOR HINGE, MALE 1121287 1121287 1121287 COIN RETURN ASSEMBLY 2006236-43...
  • Page 206 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230425 Door Parts HVV | D8-6...
  • Page 207 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230425 V21 HVV U.S. LIGHTING ITEM DESCRIPTION PART NO. LAMP, T-8, 4’ 1121173-2 LAMP, LED, 4’ 1237136-1 LAMP, T-8, 2’ 1121173 LAMP, LED, 2’ 1237136 LAMPHOLDER, FIXED 388531 LAMPHOLDER, PLUNGER 388532...
  • Page 208 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230425 Door Parts HVV | D8-8...
  • Page 209 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230425 V21 HVV INTERNATIONAL LIGHTING ITEM DESCRIPTION PART NO. LAMP, T-8 (FOR MODEL 721) 1121030 LAMP, T-8 (FOR MODEL 821) 1119340 LAMPHOLDER, PLUNGER 388532 LAMPHOLDER, FIXED 388531 LAMP BRACKET 1126231B...
  • Page 210 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230425 Door Parts HVV | D8-10...
  • Page 211 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230425 V21 HVV SELECTION PANEL ASSEMBLY MODEL NUMBER 721 / 821 ITEM DESCRIPTION PART NO. PART NO. BUTTON ASSEMBLYS: RIGHT PANEL ASSEMBLY, 6 SELECTION, BLUE 1122613 LEFT PANEL ASSEMBLY, 6 SELECTION, BLUE 1122613-1 SOLD OUT/READY TO VEND ASSY, RIGHT, 6 SEL, BLUE...
  • Page 212 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230425 Door Parts HVV | D8-12...
  • Page 213 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230425 V21 HVV T-HANDLE ASSEMBLY ITEM DESCRIPTION PART NO. LOCK COVER PLATE, BLUE 1126568 LOCK SHIELD 1126218 LOCK STUD COVER 1121817-1 T-HANDLE LOCK ASSEMBLY 1126557 T-HANDLE 1002392 SPRING 389691...
  • Page 214 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230425 Door Parts HVV | D8-14...
  • Page 215 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230425 V21 HVV INNER DOOR MODEL NUMBER ITEM DESCRIPTION PART NO. PART NO. INNER DOOR ASSEMBLY 134302-126 134302-127 RAIN SEAL, INNER DOOR, 7" 1111732-2 1111732-2 INNER DOOR SEAL 1075678 1075678-1 UPPER PRODUCT RETAINER ASSEMBLY...
  • Page 216 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230433 DOOR PARTS HVV ADA V21 HVV ADA Trade Door Section | D9-1...
  • Page 217 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230433 V21 HVV ADA Trade Door Section | D9-2...
  • Page 218 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230433 V21 HVV ADA DOOR FRONT MODEL NUMBER ITEM DESCRIPTION QTY REQ PART NO. PART NO. PART NO. UPPER SIGN FACE ** LOWER SIGN FACE ** UPPER SIGN CAP, BLUE 1127305-1 1114341-2...
  • Page 219 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230433 V21 HVV ADA Trade Door Section | D9-4...
  • Page 220 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230433 V21 HVV ADA DOOR BACK MODEL NUMBER ITEM DESCRIPTION PART NO. PART NO. PART NO. RAIN GUTTER 1121204 1121204 1121204 INNER DOOR HINGE, MALE 1121287 1121287 1121287 COIN RETURN ASSEMBLY...
  • Page 221 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230433 V21 HVV ADA Trade Door Section | D9-6...
  • Page 222 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230433 V21 HVV ADA U.S. LIGHTING MODEL NUMBER 621 / 721 ITEM DESCRIPTION PART NO. PART NO. LAMP, T-8, 48” 1121173-2 1121173-2 LMAP, LED, 48” 1237136-1 1237136-1 LAMP, T-8, 24”...
  • Page 223 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230433 V21 HVV ADA Trade Door Section | D9-8...
  • Page 224 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230433 V21 HVV ADA INTERNATIONAL LIGHTING ITEM DESCRIPTION PART NO. LAMP, T-8 (FOR MODEL 721) 1121030 LAMP, T-8 (FOR MODEL 821) 1119340 LAMPHOLDER, PLUNGER 388532 LAMPHOLDER, FIXED 388531 LAMP BRACKET 1126231B...
  • Page 225 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230433 V21 HVV ADA Trade Door Section | D9-10...
  • Page 226 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230433 V21 HVV ADA SELECTION PANEL ASSEMBLY MODEL NUMBER 721 / 821 ITEM DESCRIPTION PART NO. PART NO. BUTTON ASSEMBLYS: RIGHT PANEL ASSEMBLY, 6 SELECTION, BLUE 1122613 LEFT PANEL ASSEMBLY, 6 SELECTION, BLUE 1122613-1...
  • Page 227 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230433 V21 HVV ADA Trade Door Section | D9-12...
  • Page 228 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230433 V21 HVV T-HANDLE ASSEMMBLY ITEM DESCRIPTION PART NO. LOCK COVER PLATE, BLUE 1126568 LOCK SHIELD 1126218 LOCK STUD COVER 1121817-1 T-HANDLE LOCK ASSEMBLY 1126557 T-HANDLE 1002392 SPRING 389691...
  • Page 229 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230433 V21 HVV ADA Trade Door Section | D9-14...
  • Page 230 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230433 V21 HVV ADA INNER DOOR MODEL NUMBER ITEM DESCRIPTION PART NO. PART NO. PART NO. INNER DOOR ASSEMBLY 134302-170 134302-168 134302-169 RAIN SEAL, INNER DOOR, 7" 1111732-2 1111732-2 1111732-2...
  • Page 231 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230468 MAINTENANCE Maintenance | M-1...
  • Page 232 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230468 MAINTENANCE The following section is a basic guide for general maintenance and servicing of the vendor. This section is divided into three parts: (I) Preventative Maintenance, (II) Lubrication Guide, and (III) Care and Cleaning.
  • Page 233 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230468 III. CARE AND CLEANING: DO NOT USE WATER JET FOR CLEANING. AVOID USING WATER OR ANY OTHER LIQUIDS NEAR ELECTRONIC COMPONENTS A. GENERAL PROCEDURE (painted metal areas) Wash the vendor with soap and water.
  • Page 234 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230468 REFRIGERATION OPERATION The refrigeration operation section is divided into three areas: Basic Refrigeration Principle, Detailed Vending Machine Refrigeration Cycle, and Parts Description. BASIC REFRIGERATION PRINCIPLE What a refrigeration system really accomplishes is the transfer of heat.
  • Page 235 The following is a detailed refrigeration cycle as it applies to the refrigeration system installed in SandenVendo America, Inc. equipment. (Refer to the flow chart in Figure 1.) As the air temperature in the cabinet rises, the electronic temperature sensor reports the air temperature to the electronic controller.
  • Page 236 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230468 Maintenance | M-6...
  • Page 237 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230468 REFRIGERATION PARTS DESCRIPTION The compressor, condenser, drier, capillary tube, evaporator, and accumulator are part of a sealed system (refer to Figure 2). These items are not available separately. COMPRESSOR The compressor takes in low pressure vapor and compresses it, increasing both the pressure and the temperature.
  • Page 238 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230468 Maintenance | M-8...
  • Page 239 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230468 The parts listed below are not part of the sealed refrigeration system and are available separately. START CAPACITOR - P/N CHAMELEON: 1112805 TRADE: 1112805 HV3: 1124549 HVV: 1124549 The start capacitor is used to increase power during the start.
  • Page 240 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230476 TROUBLESHOOTING V21 T roubleshooting Chameleon / Trade / HV3 | T1-1...
  • Page 241 This warranty benefits each current owner of a V21 vending machine, whether that owner is the original purchaser or a transferee. The SandenVendo America, Inc. Company warrants each part of each new vending machine for a period of fifteen (15) months from the date of shipment, to be free from defects in material and workmanship.
  • Page 242 Mark all packages with the Returns Goods Authorization number provided by your CSR and send it by the most inexpensive method of transportation (Federal Express Ground or Overnight Transportation). SandenVendo can also provide pick up service upon request. Please ask your CSR about this option. Return package(s) to: SANDENVENDO...
  • Page 243 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230476 TROUBLE SHOOTING GUIDE CHAMELEON / TRADE / HV3 The V21 vendor provides self-diagnostics to aid you in the trouble shooting process. Error codes are stored in the controller’s memory when a system error is sensed. These codes can be accessed by following the procedure listed below.
  • Page 244 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230476 Error DESCRIPTION OF ERROR CODE CHECKING METHOD CORRECTIVE ACTION Selection switch skipped - switch nn Usnn unassigned and a higher number switch Switch is assigned. is assigned.
  • Page 245 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230476 Error DESCRIPTION OF ERROR CODE CHECKING METHOD CORRECTIVE ACTION Dollar Bill Validator If changer or card reader is being If there are no “CC” or “rC” errors: used, check for “CC”...
  • Page 246 ERROR PROBABLE CAUSE CORRECTIVE ACTION Coin Acceptance/Payout (Record all errors for reference if SandenVendo America, Inc. Technical Service is required) Check to make sure the red LED on the control board is flashing No power to control board. red. If flashing, check MDB harness connections. If connections are good, replace changer.
  • Page 247 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230476 ERROR PROBABLE CAUSE CORRECTIVE ACTION Defective validator harness (credit not Make sure that the validator and harnessing getting from validator to control board is correct for your style of validator and it is Bill validator takes a bill but does through the harness).
  • Page 248 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230476 ERROR PROBABLE CAUSE CORRECTIVE ACTION Check display and display harness. Replace if Defective display or display harness. No digital display; vendor necessary. lights on. Check for a flashing red light on control If no light, replace control board.
  • Page 249 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230476 ERROR PROBABLE CAUSE CORRECTIVE ACTION Defective overload relay Replace the overload relay. Compressor will not start, Compressor motor rocked Replace the refer unit. condenser fan motor running - unit hot (power to Defective capacitor Replace the capacitor.
  • Page 250 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230476 Open and close the door to make sure lights and Defective door switch. fan come on. If not, then check the door switch. Unit will only run in the Follow the same steps detailed above about the heater test mode.
  • Page 251 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230476 TROUBLE SHOOTING GUIDE HVV The V21 vendor provides self-diagnostics to aid you in the trouble shooting process. Error codes are stored in the controller’s memory when a system error is sensed. These codes can be accessed by following the procedure listed below.
  • Page 252 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230476 ERROR DESCRIPTION OF ERROR CODE CHECKING METHOD CORRECTIVE ACTION Clear inlet chute blockage. If no Check inlet chute for blockage. blockage found, replace changer. If Changer inlet chute blocked - no Drop coins in Sales Mode or Tube acceptance rate is acceptable,...
  • Page 253 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230476 Error DESCRIPTION OF ERROR CODE CHECKING METHOD CORRECTIVE ACTION Unplug service cord. Wait at Bill acceptor check sum is If error does not clear, replace bill Bill Acceptor ROM least 5 seconds.
  • Page 254 ERROR PROBABLE CAUSE CORRECTIVE ACTION Coin Acceptance/Payout (Record all errors for reference if SandenVendo America, Inc. Technical Service is required) Check to make sure the red LED on the control board is flashing red. If No power to control board.
  • Page 255 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230476 ERROR PROBABLE CAUSE CORRECTIVE ACTION Defective acceptor harness (credit not getting from acceptor to Make sure that the acceptor and harnessing is correct for your style of Bill acceptor takes a control board through the acceptor and it is plugged in and wired properly.
  • Page 256 V21 Parts & Service Manual REV A – 10/2013 All V21 Identified Equipment P/N: 1230476 ERROR PROBABLE CAUSE CORRECTIVE ACTION Defective main harness or secondary power harness to the Check transformer and fuse. transformer. Vendor appears dead; no digital Check power to control board. If there is power check LED. If LED is not Control Board LED display and no lit or is solid red, replace the control board.
  • Page 257 Check, replace if needed. Compressor motor problem. Loss of refrigerant. Replace refrigeration unit, contact SandenVendo America, Inc. Condenser fan not working. Technical for warranty service. Check for obstruction of fan blades Compressor runs Blocked or dirty condenser (refer check circuit to fan motor, replace.

This manual is also suitable for:

V21 521V21 621V21 721V21 821

Table of Contents

Save PDF