Proper Use - EINHELL BT-SM 1800 Operating Instructions Manual

Danger!
The equipment and packaging
material are not toys. Do not
let children play with plastic
bags, foils or small parts. The-
re is a danger of swallowing
or suff ocating!
Drag, crosscut and miter saw
•
Clamping device (8)
•
2 x workpiece support (10)
•
Sawdust bag (22)
•
Hexagon key (c, d)
•
Additional feet (9)
•
Original operating instructions
•
Safety instructions
•

3. Proper use

The drag, crosscut and miter
saw is designed for cross-cutting
wood and wood-type materials
which are appropriate for the
machine's size. The saw is not
designed for cutting fi rewood.
The equipment is to be used
only for its prescribed purpose.
Any other use is deemed to be a
case of misuse. The user / ope-
rator and not the manufacturer
will be liable for any damage or
injuries of any kind caused as a
result of this.
Anl_BT_SM_1800_SPK7.indb 37 Anl_BT_SM_1800_SPK7.indb 37
GB
Please note that our equipment
has not been designed for use
in commercial, trade or industrial
applications. Our warranty will be
voided if the machine is used in
commercial, trade or industrial
businesses or for equivalent pur-
poses.
The equipment is to be operated
only with suitable saw blades. It
is prohibited to use any type of
cutting-off wheel.
To use the equipment properly
you must also observe the sa-
fety information, the assembly
instructions and the operating
instructions to be found in this
manual.
All persons who use and service
the equipment have to be ac-
quainted with these operating in-
structions and must be informed
about the equipment's potential
hazards. It is also imperative to
observe the accident prevention
regulations in force in your area.
The same applies for the gene-
ral rules of health and safety at
work.
The manufacturer will not be lia-
ble for any changes made to the
equipment nor for any damage
resulting from such changes.
Even when the equipment is
- 37 -
26.07.2018 07:46:51 26.07.2018 07:46:51