Layout And Items Supplied - EINHELL BT-SM 1800 Operating Instructions Manual

2. Layout and items supplied

2.1 Layout (Fig. 1-3)
1. Handle
2. ON/OFF switch
3. Release lever
4. Machine head
5. Saw shaft lock
6. Adjustable blade guard
7. Saw blade
8. Clamping device
9. Additional feet
10. Workpiece support
11. Fixed stop rail
12. Table insert
13. Adjustable foot
14. Locking screw
15. Pointer
16. Scale
17. Turntable
18. Fixed saw table
19. Scale
20. Pointer
21. Locking screw
22. Sawdust bag
23. Drag guide
24. Locking screw for drag guide
25. Fastening bolt
26. Locking screw for workpiece
support
27. Knurled screw for cutting
depth limiter
28. Stop for cutting depth limiter
29. Adjusting screw
30. Adjusting screw
31. Flange bolt
Anl_BT_SM_1800_SPK7.indb 36 Anl_BT_SM_1800_SPK7.indb 36
GB
32. Outer fl ange
33. Button
34. Movable stop rail
35. Laser
36. Swing-out stability bar
37. ON/OFF switch for laser
38. Transport handle
2.2 Items supplied
Please check that the article
is complete as specifi ed in the
scope of delivery. If parts are
missing, please contact our ser-
vice center or the sales outlet
where you made your purchase
at the latest within 5 working
days after purchasing the pro-
duct and upon presentation of a
valid bill of purchase. Also, refer
to the warranty table in the ser-
vice information at the end of the
operating instructions.
Open the packaging and take
•
out the equipment with care.
Remove the packaging mate-
•
rial and any packaging and/
or transportation braces (if
available).
Check to see if all items are
•
supplied.
Inspect the equipment and
•
accessories for transport da-
mage.
If possible, please keep the
•
packaging until the end of the
guarantee period.
- 36 -
26.07.2018 07:46:51 26.07.2018 07:46:51