Main Interface - Dahua Villa VTO User Manual

Log in to the web interface of the VTO, and then the main interface is displayed.
No. Function
1 General function
2 VTO information
System
3
information
4 Config manager
5 Function area
3

Main Interface

Figure 3-1 Main interface
Table 3-1 Main interface introduction
Description
 Click
address.
Click to go to the main interface.

 Click
to factory settings.
You can view the general information of the VTO, including
building No., unit No., device type, and VTO No..
You can view the software version, MCU version, and security
baseline version.
Select Device Info or User Info, and then you can export the
VTO configuration or user information to the PC or import them
from it.
Click the buttons to go to the corresponding menu.
4
to change the password and your email
to log out, reboot the VTO or restore the VTO