Onvif User - Dahua Villa VTO User Manual

Step 2 Configure parameters.
Parameter
CGI Enable
Mobile Push
Notification
Password Reset
Audio/Video
Transmission
Encryption
Onvif Enable
RTSP Over TLS
Outbound Service
Information
Multicast/Broadcast
Search
Authentification
Mode
Step 3 Click Save to save.
4.6

Onvif User

Onvif user is only for engineers. You can add, delete, and modify ONVIF user information. The
Onvif username is admin by default.
Table 4-5 Security parameter description
Description
Select the check box to enable, and then you can use CGI command.
After you have enabled this, nitifications will be pushed to the app
installed on your phone.
Select the check box to enable, and then the password resetting is
available.
If you have enabled this, transmission of audio and video will be
encrypted.
After Onvif is enabled, videos from devices manufactured by other
companies can be displayed on the door station web interface.
RTSP is the abbreviation of real time streaming protocol, it's a network
control protocol designed for use in entertainment and
communications systems to control streaming media servers. The
protocol is used for establishing and controlling media sessions
between end points.
After it is enabled, service password information cannot be sent to
others.
If you have disabled this, VDP configure tools cannot find this device.
There are two modes: Security Mode (Recommended) and compatible
mode.
Figure 4-8 Onvif user
12