This chapter introduces how to configure IP address, SIP server, DDNS, and UPnP.
6.1
Basic
6.1.1 TCP/IP
You can modify the IP address and port number of the VTO.
Step 1
Select Network Setting > Basic.
Step 2
Enter the network parameters and port number, and then click Save.
The VTO will restart, and you need to modify the IP address of your PC to the same
network segment as the VTO to log in again.
6.1.2 Port
6.1.2.1 Creating Server Certificate
Click Create Server Certificate, enter needed information, click Save, and then the
terminal will restart.
6
Network Setting
Figure 6-1
TCP/IP and port
20