Input Menu - ViewSonic PJ501 User Manual

INPUT Menu

The INPUT menu has 4 items as shown in Table 7.
Select the item you want to adjust with the
button or the ENTER button.
Remember, the starting of the item AUTO performs its function at the
same time.
Item Actions/Description
AUTO Auto Adjust (for RGB): It adjusts automatically the H POSITION, V POSITION, H PHASE and
H SIZE. Use this function with the maximum size window of the application.
Auto Adjust (for VIDEO/S-VIDEO): It automatically selects the proper VIDEO mode for the
current input signal. This function is active only when the AUTO mode is selected at the item
VIDEO. Please refer to the description of the item VIDEO below.
• This function may not function correctly with the PAL60 signal or some other signals.
• This function requires approximately 10 seconds.
• For the COMPONENT VIDEO, the signal type is distinguished automatically though this
VIDEO Select Mode of Signal Type (for VIDEO/S-VIDEO):
Press the
• AUTO
• NTSC
• PAL
• SECAM
• NTSC 4.43
• M-PAL
• N-PAL
Selecting of the AUTO mode activates and performs the function of the item AUTO for VIDEO/S-
VIDEO. It selects automatically the proper one of the modes above.
Use this function when the image becomes unstable at VIDEO/S-VIDEO. (eg. The image
becomes irregular, or lacks color.)
• The operation of the AUTO mode may not function correctly with the PAL60 signal or some
• The operation of the AUTO mode requires approximately 10 seconds.
• For the COMPONENT VIDEO, the signal type is distinguished automatically though this
HDTV Select Mode of HDTV Signal Type:
1080i
• When the selected HDTV mode is incompatible with the input signal, the picture may be
SYNC ON G On/Off SYNC ON G Mode:
TURN ON
Selecting the TURN ON turns the SYNC ON G mode on. The SYNC ON G mode enables the
SYNC on G to be received.
• In the SYNC ON G mode, the picture may be incorrect with some signals. In such cases,
15 ViewSonic PJ501/PJ551
Table 7: INPUT Menu
function is inactive. For HDTV signal, refer to the item HDTV below.
/
button to select one of these options:
other signals.
function is inactive. For HDTV signal, refer to the item HDTV below.
1035i
incorrect.
TURN OFF
remove the signal connector so that no signal is received and turn the SYNC ON G off, and
then reconnect the signal.
/ buttons and press the