Main Menu - ViewSonic PJ501 User Manual

MAIN Menu

To access the MAIN Menu, press the MENU button on the remote control. This projector has 6
menus: MAIN, PICTURE-1, PICTURE-2, INPUT, SCREEN and OPTION. To select a menu use the
buttons, then press the
/
The MAIN Menu has seven (7) items as shown in the Table 4.
Please select the item you want to operate with the
press the button or the ENTER button to start operating. Then you
can operate corresponding to the following table.
Item Actions/Description
BRIGHT
Lighter
(Brightness)
CONTRAST
Stronger
ASPECT Select Aspect Ratio
(Aspect Ratio) Select ASPECT from the MAIN menu and then do the following:
For RGB Input or Hi-Vision 1035i/1125i/750p of COMPONENT VIDEO Input , press the
button to select one of these options:
• 4:3
• 16:9
For VIDEO Input, S-VIDEO Input or 525i/525p/625i of COMPONENT VIDEO Input, press the
• 4:3
• 16:9
• SMALL (The SMALL option may not work properly with some input signals.)
NOTE: You can also press the ASPECT button on the remote control to select the Aspect Ratio.
PICT. POSIT. Select Picture Position (for 16:9/SMALL Picture)
(Picture Position)
Press the
• TOP
• CENTER
• BOTTOM
GAMMA Select Gamma Mode
Press the
• NORMAL
• CINEMA
• DYNAMIC
MIRROR Select Mirror Status:
Press the
• NORMAL
• H:INVERT
• V:INVERT
• H&V:INVERT (Horizontally and Vertically Inverted image)
button or the ENTER button to select a menu item.
Table 4: MAIN Menu
Darker
Weaker
/
button to select one of these options:
/
button to select one of these options:
/
button to select one of these options:
/
button to select one of these options:
(Horizontally Inverted image)
(Vertically Inverted image)
buttons and
/
ViewSonic PJ501/PJ551
/
12