ViewSonic PJ501 User Manual page 14

Item
AUTO
(remote control)
BLANK ON/OFF
(remote control)
MENU (*)
(projector control panel
and remote control)
SEARCH
(remote control)
ASPECT
(Aspect Ratio)
(remote control)
ESC (Escape)
(remote control)
ENTER
(remote control)
11 ViewSonic PJ501/PJ551
Table 3: Basic Operation (Continued)
Description
Automatic Adjustment (for RGB input): Press the AUTO button. Horizontal Position (H.
POSITION), Vertical Position, (V. POSITION), Clock Phase (H. PHASE), and Horizontal Size
(H. SIZE), are automatically adjusted.
• Before using the AUTO feature, be sure to maximize the window of the application
displayed on-screen.
Automatic Adjustment (for Video Input): Press the AUTO button. A signal type
appropriate for the input signal is selected automatically. This is valid only when AUTO is set
for VIDEO on the menu.
• This operation requires approximately ten seconds. It may not function correctly with some
input signals.
Set/ Clear Blank Mode: press the BLANK button. A blank screen (no image) is displayed in
this mode. Access the on-screen menu to set the screen color for blank mode.
Display/Clear Menu: Press the MENU button.
Select Menu: Press the
INPUT, SCREEN, OPTION), and press the
control) to proceed.
Select Item: Press the
button or the ENTER button (on the remote control) to proceed.
Select Menu Type (for adjustment with numerical value): After fixing the item, press the
button or ENTER button (on the remote control) to turn to the single type menu. To return
to the usual menu, press the
Operate: Press the /
• The menu display is terminated automatically after approximately 10 seconds of inactivity.
Search Signal: Press the SEARCH button on the remote control to search for other signal
inputs with following command : When a signal is detected, the projector displays the
detected signal picture. If no signal is detected, it turns back to the initial signal input.
Example : If S-VIDEO was the last input used before powering off, then S-VIDEO will be the
selected input when the projector is powered back on.
RGB VIDEO S-VIDEO
Select Aspect (Ratio): Press the ASPECT button on the remote control to select the aspect
ratio.
For RGB Input or Hi-Vision 1125i/750p of COMPONENT VIDEO Input:
4:3 16:9
For VIDEO Input, S-VIDEO Input or 525i/525p/625i/625p of COMPONENT VIDEO Input:
4:3 16:9 SMALL
Escape: Press the ESC button on the remote control to return to the previous menu from a
selected sub-menu.
Escape: Press the ENTER button on the remote control activate the adjustment screen for a
selected menu option.
NOTE: Pressing the button performs the same function.
/ buttons to select the menu (MAIN, PICTURE-1, PICTURE-2,
button or the ENTER button (on the remote
/ buttons to select the item you want to operate, and press the
button or ESC button.
buttons according to the menu.
COMPONENT VIDEO
(4:3)
(RGB)