INPUT menu
With the INPUT menu, items shown in the table below can
be performed.
Choose
an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button on
the remote control to progress. Then perform it referring to
the following table.
Item
COLOR
SPACE
VIDEO
FORMAT
ViewSonic PJ400
Using the buttons ▲/▼ switches the mode for color space.
AUTO
RGB
════=══=══=══=══=══=══=════
• This item can be chosen only at a RGB signal or a component
video signal.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well at some signals. In
such a case, it might be good to select the SMPTE240 or the
REC709.
Using the buttons ▲/▼ switches the mode for video format.
AUTO
NTSC
N-PAL
M-PAL
• This item performs only at a video signal from the VIDEO
port or the S-VIDEO port. For a component video signal, the
signal type is identified automatically, independently of this
function.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well at some signals. If the
picture becomes unstable (ex. an irregular picture, a color lack),
please select the mode depending on the input signal.
Description
SMPTE240
REC709
PAL
SECAM
NTSC4.43
REC601
32