Setup Menu - ViewSonic PJ1065 User Manual

Setup Menu

The following adjustments and settings are pos-
sible when SETUP is selected at the top of the
menu. Part of the Setup menu differs between
RGB input and video input. Select an item with
the and buttons, and start operation. Use
the Single menu to reduce menu size (see Table
3, MENU SELECT).
Item
Adjustment: Dark
BRIGHT
Adjustment: Weak
CONTRAST
Adjustment: Down
V POSIT
Adjustment: Left
H POSIT
Adjustment: Left
H PHASE
• Adjust to eliminate flicker.
Adjustment: Small
• The image may not be displayed correctly if the
H SIZE
horizontal size is excessive. In such cases, press the
RESET button, and initialize the horizontal size.
Adjustment: Soft
SHARPNESS
Adjustment: Light
COLOR
Adjustment: Red
TINT • Valid only when NTSC or NTSC 4.43 signal is
received.
COLOR BAL R Adjustment: Light
COLOR BAL B Adjustment: Light
Select Image Aspect Ratio:
Select position of image:
Press the
selected.
Center
Select Image Aspect Ratio:
ASPECT
Select position of image:
Press the
has been selected.
Center
• 4:3 small cannot be selected with the input of 720P
or 1080i component.
• 4:3 small may not be displayed correctly with some
input signals.
12 ViewSonic PJ1065
Table 4: Setup Menu
Description
Light
Strong
Up
Right
Right
Large
Clear
Dark
Green
Dark
Dark
button when 16:9 [
Down Up ( Center
button when 16:9 [
Down Up ( Center
RGB IN 1
RGB IN 2
DVI
RGB IN 1
RGB IN 2
] has been
)
small[ ]
] / 4:3 small [ ]
)
VIDEO
S-VIDEO
COMPONENT VIDEO
VIDEO
DVI S-VIDEO
COMPONENT