Image Menu - ViewSonic PJ1065 User Manual

Image Menu

The following adjustments and settings are available when IMAGE is
selected on the menu. Select an item with the
or stop operation with the
Item
Select Blank Screen: Select the screen with the
(MyScreen, ORIGINAL or one colors) is displayed when the BLANK mode is ON.
MyScreen is a mode that the customer-customized screen is displayed. This is
BLANK the blue screen at the factory setting. Refer to the description of MyScreen below.
ORIGINAL is a mode that the factory fixed screen is displayed.
• When MyScreen or ORIGINAL is selected, the screen is going blank after
several minutes.
Select Start Up Screen: Select the screen in case of no signal input with the
button. The selected one (MyScreen, ORIGINAL or TURN OFF) is displayed
when no signal is input
MyScreen is a mode that the customer-customized screen is displayed. This is
START UP the blue screen at the factory setting. Refer to the description of MyScreen below.
ORIGINAL is a mode that the factory fixed screen is displayed.
TURN OFF displays the blue screen.
• When MyScreen or ORIGINAL is selected, the screen is going blank after
several minutes.
Set MyScreen Mode: Select the EXECUTE with the
MyScreen menu and set the MyScreen mode for BLANK and START UP
functions.
ESC clears and closes the menu box.
NORM. is default of the MyScreen menu.
FREEZE freezes the image and displays the frame to capture.
Press the button after freeze to go to the MyScreen Capture Position mode.
In the MyScreen Capture Position mode, the buttons
move the frame to capture.
After adjusting the position, press the KEYSTONE button to go to the MyScreen
MyScreen
Display Size mode.
To cancel freezing and return to the NORM. Mode of the MyScreen menu, press
the RESET button.
In the MyScreen Display Size mode, select the magnification x1, x2 or FULL with
the button
After selecting the magnification, press the KEYSTONE button to go to the CAPT.
mode and start capturing.
To return to the MyScreen Capture Position mode, press the RESET button.
CAPT. executes a capturing the image. It requires about 20 seconds. After
capturing, the captured image will be displayed for about 10 seconds.
Select Mirror Status: Select mirror status with
MIRROR
Select Position of P. in P. Display: Press the
P. IN P.
POSIT
• Valid only at RGB IN 1, RGB IN 2 or DVI input.
P. IN P. Select signal of P. in P. Display: Press the
INPUT VIDEO
Select Gamma Mode: Select the gamma mode with the
GAMMA
NORMAL
14 ViewSonic PJ1065
and
and buttons.
Table 6: Image Menu
.
S-VIDEO
CINEMA
buttons, and start
Description
/
button.
COMPONENT
DYNAMIC
button. The selected one
button to display the
, , and allow to
button.
button.
button.
/