ViewSonic PJ458D User Manual
Ultra-portable xga dlp projector
Hide thumbs
Also See for PJ458D:
- Quick start manual (186 pages) ,
- User manual (44 pages) ,
- Specification sheet (2 pages)
Related Manuals for ViewSonic PJ458D
Summary of Contents for ViewSonic PJ458D
- Page 1 ViewSonic ® PJ458D - User Guide DLP Projector - Guide de l’utilisateur - Bedienungsanleitung - Guía del usuario - Guia do usuário - Руководство пользователя - 使用手冊 (繁體) - 使用手冊 (簡體) - 사용자 안내서 Model No. : VS10872...
-
Page 2: Compliance Information
Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. -
Page 3: Important Safety Instructions
ViewSonic PJ458D... -
Page 4: Declaration Of Rohs Compliance
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight. ViewSonic PJ458D Proposed Maximum Concentration 0.1%... -
Page 5: Copyright Information
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic, the three birds’ logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. VESA is a registered trademark of the Video Electronics Standards Association. -
Page 6: Notes On Ac Power Cord
We highly recommend using a video source device also equipped with a grounding type AC line plug to prevent from signal interference due to voltage fluctuation. Ground For Australia and Mainland China Ground For Continental Europe ViewSonic PJ458D Ground For the U.S.A. and Canada Ground For the U.K. -
Page 7: Table Of Contents
Menu Options ...4 Image ...5 Video ...8 Display...9 Language ...0 Advanced ... Audio ... Maintenance ... Cleaning the Lens ... Cleaning the Projector Housing... Replacing the Lamp ...4 Technical Specifications ...6 Appendix...7 Indicator Messages ...7 Preset Signals ...8 ViewSonic PJ458D... -
Page 8: Product Introduction
State-of-the-art motion adaptive hardware deinterlacing with 3:2 pull down 00-watt, user-replaceable lamp Compatibility with Macintosh Compatibility with NTSC, PAL, SECAM, and HDTV Multi-function remote control D-Sub 15-pin cable for analog video connectivity User-friendly, multi-language on-screen display (OSD) Advanced electronic keystone correction * means compressed. ViewSonic PJ458D ® computers... -
Page 9: Package Contents
For maximum protection, repack your NOTE unit as it was originally packed at the factory. Accessories and components may vary by retailer and region. ViewSonic PJ458D AC Power Cord Composite Video Cable POWER... -
Page 10: Getting To Know The Projector
Projector Components Front View . Lens cap . Lens cap strap . Lens 4. Ventilation holes (intake) 5. Zoom ring ViewSonic PJ458D 6. Focus ring 7. Control panel 8. Speaker 9. Front IR remote control sensor 0. Ventilation holes (exhaust) -
Page 11: Bottom View
Rear View . Interface connector . Rear IR remote control sensor 3. Security lock receptacle 4. AC power socket 5. Ventilation holes (intake) 6. Foot adjuster 7. Foot adjuster button Bottom View . Lamp cover ViewSonic PJ458D... -
Page 12: Interface Connector
3. COMPUTER IN (D-SUB) connector Connect image input signal (analog) to this connector. 4. S-VIDEO connector Connect S-Video output from video equipment to this jack. 5. VIDEO connector Connect composite video output from video equipment to this jack. ViewSonic PJ458D... -
Page 13: Remote Control Components
. Menu button 4. Enter button 5. Keystone / buttons 6. Volume / buttons 7. Source button 8. Mute button 9. Blank button 10. 4:3/16:9 button . Auto button ViewSonic PJ458D POWER AUTO SOURCE MENU ENTER BLANK LASER VOLUME 4:3/16:9... -
Page 14: Installation
Installation Connecting the Projector A. Connecting to a computer AC Power Cord VGA Cable (D-SUB to D-SUB) Desktop type Laptop type ViewSonic PJ458D... - Page 15 B. Connecting to a Video Source 1.Connecting with S-Video Cable AC Power Cord S-Video Cable Audio Cable ViewSonic PJ458D...
- Page 16 2.Connecting with Composite Video Cable AC Power Cord Composite Video Cable Audio Cable ViewSonic PJ458D...
- Page 17 3.Connecting with HDTV Cable AC Power Cord D-SUB to HDTV Cable Audio Cable When connecting cable, power cords of both a projector and external equipment should be disconnected from AC outlet. ViewSonic PJ458D...
-
Page 18: Powering On/Off The Projector
Remote Control again to turn off the power. Wait until the lamp LED indicator turns off. Please wait until the fan motor and the lamp LED turn off before removing the AC power cord from the projector. ViewSonic PJ458D Power button on Power button on Power button... -
Page 19: Adjusting The Projected Image
2. Lower the projector, and then release the buttons to lock the foot adjusters into position. You may turn the foot adjuster to make fine adjustment of the height. To avoid damaging the projector, make sure that the foot adjuster is fully retracted before placing the projector in its carrying case. ViewSonic PJ458D... -
Page 20: Adjusting The Projector Zoom And Focus
A still image is recommended for focusing. Adjusting Projection Image Size Refer to the graphic and table below to determine the screen size and projection distance. Distance between the screen and the center of the lens ViewSonic PJ458D Focus Ring Zoom Ring... - Page 21 Make sure the heat ventilation holes are not blocked. Do not use the projector in a smoky environment. Smoke residue may cause buildup on critical parts (i.e. DMD, lens assembly, etc.) ViewSonic PJ458D 16 : 9 Screen Size-Diagonal (inch) Tele 7.5...
-
Page 22: Using The Projector
4. AUTO () Automatically adjusts frequency and phase. 5. Four direction buttons The four direction buttons /// can be used to scroll through OSD (On- Screen Display) menus and make adjustments. 6. SOURCE () Manually selects an input source. ViewSonic PJ458D... -
Page 23: Remote Control
Cuts off the sound temporarily. 9. Blank Cuts off the screen temporarily. 10. 4:3/16:9 Press the 4:3/16:9 to switch the image aspect ratio from 4: to 6:9. . Auto Automatically adjusts frequency and phase. ViewSonic PJ458D POWER AUTO SOURCE MENU ENTER BLANK LASER VOLUME... -
Page 24: Battery Replacement
Do not dispose of the used battery along with household waste. Dispose of used batteries according to local regulations. Avoid excessive heat and humidity. Danger of explosion may happen if a battery is incorrectly replaced. Replace only with the same type recommended by the manufacturer. ViewSonic PJ458D... -
Page 25: Remote Control Operation
Do not drop the remote control or jolt it. NOTE Keep the remote control out of locations with excessively high temperature or humidity. Do not get water on the remote control or place wet objects on it. Do not disassemble the remote control. ViewSonic PJ458D... -
Page 26: Menu Options
On the Projector Control Panel: Go back to main menu tab with the / buttons, and press the MENU\ENTER button. On the Remote Control: press the Menu button. The illustrations in this manual are for the purpose of explanation and may NOTE differ from the actual setting of your projector. ViewSonic PJ458D... -
Page 27: Image
SVGA (800 x 600). If the input signal is a computer signal greater than SVGA or component 1080i / 720p, only 6:9 or 4: aspect ratio will be available. ViewSonic PJ458D Press the button to decrease the contrast. Press the button to increase the contrast. - Page 28 Red, Green and Blue mode activate only if the Color Temperature is set to “User”. ViewSonic PJ458D 1:1: The input source will be displayed without scaling 6:9: The input source will be displayed in wide screen mode (16:9) without scaling.
- Page 29 Select the desired setting with the / buttons: Blue Manually adjusts blue. Select the desired setting with the / buttons: ViewSonic PJ458D User Press the button to decrease the color temperature. Press the button to increase the color temperature.
-
Page 30: Video
Press the button to increase the amount of red in the image. Sharpness Adjusts the sharpness of the image. Select the desired setting with the / buttons: Press the button to decrease the sharpness. Press the button to increase the sharpness. ViewSonic PJ458D... -
Page 31: Display
Press the button to move the image right. V.Position Adjusts the vertical position. Select the desired setting with the / buttons: Press the button to move the image up. Press the button to move the image down. ViewSonic PJ458D... -
Page 32: Language
Select the language you prefer with the / buttons, and confirm the selection with the MENU\ENTER button on the Projector Control Panel or the Enter button on the Remote Control. English Deutsch Français Español Português Italiano ViewSonic PJ458D... -
Page 33: Advanced
Displays operating hours since lamp timer reset. Lamp hour counter is displayed in read-only format, and this setting cannot be manually adjusted. Color Space Manually selects signal type. Select the input signal type with the / buttons: YCbCr YPbPr ViewSonic PJ458D... - Page 34 Select the desired setting with the / buttons: Press the button to decrease the volume. Press the button to increase the volume. Mute Cuts off the sound temporarily. Select the desired setting with the / buttons: ViewSonic PJ458D...
-
Page 35: Maintenance
Make sure the lens is cool before cleaning. NOTE Do not use detergents or chemicals other than those noted above. Do not use benzene or thinners. Do not use chemical sprays. Use a soft cloth or lens paper only. ViewSonic PJ458D... -
Page 36: Replacing The Lamp
Leave the area immediately if the lamp shatters while being operated and ventilate the area for at least 0 minutes in order to avoid the inhalation of mercury fumes. Otherwise it could be harmful to user’s health. ViewSonic PJ458D... - Page 37 Do not reuse the old lamp. This could cause the lamp to explode. Be sure to turn off the projector and unplug the AC power cord before replacing the lamp. Do not use the projector with the lamp cover removed. ViewSonic PJ458D...
-
Page 38: Technical Specifications
Power Consumption Dimension (W x D x H) Weight Note: Design and Specifications are subject to change without prior notice. ViewSonic PJ458D Single panel 0.55” DLP projector 786,4 dot x (04 x 768 x) Manual Zoom (1.2X) 20.2 - 24.2 mm :, 6:9, 4: 30 –... -
Page 39: Appendix
Amber Solid Lamp LED Green Flashing Lamp LED Amber Flashing ViewSonic PJ458D Meaning The projector is powered and ready. The projector system has some problems with its fan, so the projector cannot start up. The projector is in good condition on working. -
Page 40: Viewsonic Pj458D
SXGA VESA 70 Hz SXGA VESA 75 Hz SXGA VESA 85 Hz 1280 x 960 SXGA VESA 60 Hz SXGA VESA 75 Hz 1280 x 1024 SXGA VESA 60 Hz ViewSonic PJ458D fH (kHz) fV (Hz) Sync 31.469 59.940 H(-), V(-) 37.861... -
Page 41: Hdtv Preset Signals
HDTV Preset Signals Preset Signals Horizontal Frequency (kHz) 480i 480p 720p 1080i Note: Specifications are subject to change without notice. ViewSonic PJ458D 15.8 kHz 31.5 kHz 45.0 kHz 33.8 kHz Vertical Frequency (Hz) 60 Hz 60 Hz 60 Hz 60 Hz... -
Page 42: Other Information
Thailand South Africa/ www.ap.viewsonic.com Other countries Hong Kong www.hk.viewsonic.com Macau www.hk.viewsonic.com Korea www.kr.viewsonic.com ViewSonic PJ458D T=Telephone E-mail F=Fax T= 800 688 6688 service.us@viewsonic.com F= 909 468 1202 T= 866 463 4775 service.ca@viewsonic.com F= 909 468 5814 T= 866 323 8056 soporte@viewsonic.com... -
Page 43: Limited Warranty
ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will at its sole option repair or replace the product with a like product.
Need help?
Do you have a question about the PJ458D and is the answer not in the manual?
Questions and answers