Trouble Shooting - O.S. engine Max-37SZ-Hring Owner's Instruction Manual

Hide thumbs Also See for Max-37SZ-Hring:
Table of Contents

Advertisement

TROUBLE SHOOTING

Cause
Fuel tank is empty.
Fuel not reaching the engine.
Glowplug element is burnt out.
Glowplug battery discharged
Clogged fuel filter
Silencer inside is dirty.
Over priming
Fuel tubing is disconnected.
Fuel tubing is kinked, split or has a hole.
Incorrect carburetor settings
Incorrect servo linkage
Reverse rotating direction of electric starter.
Symptom
Engine fires intermittently but does not run.
Cause
Insufficient fuel in the tank.
Deteriorated glowplug
Clogged fuel filter
Silencer inside is dirty.
Engine overheated
Starting battery disconnected too soon.
Air bubbles in fuel.
Symptom
Engine fails to fire.
Corrective action
Fill the tank with fuel and repeat
Priming procedure.
Replace glowplug.
Recharge or replace the battery.
Clean or replace fuel filter.
Clean inside silencer.
Remove glowplug and pump excess fuel.
Connect fuel tubing securely.
Check the tubing carefully and replace if necessary.
Return the needle valve
and mixture control valve to basic position.
Re-linkage after setting servo at neutral.
Mare sure it rotates counter clockwise seen
from crankshaft side.
28
Corrective action
Fill the tank with fuel.
Replace glowplug.
Clean or replace fuel filter.
Clean inside silencer.
Wait until engine is cooled.
Do not disconnect plug battery and wait until
r.p.m. become stable.
Mount fuel tank in foam rubber
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Max-37sz-hring

Table of Contents