Optional Lifebreath Ventilation Controls - Lifebreath 350DCS Operation And Installation Manual

Optional Lifebreath Ventilation Control - Part #99-BC02
Key Features:
2 speed fan setting (LOW / HIGH)

Standby setting (fan OFF)

Electronic Dehumidistat

Compatible with 99-DET02 Wireless Timers

Slim-line design

Connect to 3 wire 20 gauge low voltage wire

BC02 Operating Instructions:
Turning on the Control
Press and release the ON/OFF button
Setting the Ventilation Speed
Press and release the Fan button
LO and HI indicator lights are off, the fan is OFF but will turn ON if required by the Dehumidistat or remote Timer (if installed).
Humidity Control
Your unit will reduce indoor humidity when outdoor humidity levels are lower than indoor humidity levels. This feature is only
effective when the outdoor temperature is below 59˚F (15˚C).
Setting the Dehumidistat
Press and release the Dehumidistat button
Dehumidistat light will either flash or be on continuous.
A flashing light indicates the humidity level is higher than the setting and the unit is operating on high speed ventilation. A
continuous light indicates the humidity level is lower than the setting. Refer to the unit's Home Owner's manual for instructions on
how the Dehumidistat works.
The Dehumidistat will override the current speed setting to HIGH speed.
The Dehumidistat function can be turned OFF by pressing the
Note - Only 1 Dehumidistat should be installed in a system.
. The light above will illuminate.
to select LOW or HIGH fan speed. The corresponding "Indicator Light" will illuminate. If both
until the Dehumidistat Light is at the desired setting. After a few seconds the
Humidity
Setting
ON/OFF Light
ON/OFF Button
Dehumidistat
Button
button until no Dehumidistat light is on.
8
Fan Speed
Indicator
Fan Speed
Button