Advertisement
To delete a PIN user
To change the PIN of a PIN user
(This step must be done out of programming mode)
To delete All users
To delete ALL users. Note that this is a dangerous
option so use with care
To unlock the door
For a PIN user
11.2 Door Settings
Relay Output Delay Time
To set door relay strike time
Door Open Detection
Door Propped Open Alarm. When used with an optional magnetic contact or built-in magnetic contact of the lock, if
the door is opened normally, but not closed after 1 minute, the inside buzzer will beep automatically to remind people
to close the door and continue for 1 minute before switching off automatically.
Door Forced Open Alarm. When used with an optional magnetic contact or built-in magnetic contact of the lock,
if the door is opened by force, or if the door is opened after 20 seconds of the electro-mechanical lock not being
closed properly, the inside buzzer and alarm output will both operate. The Alarm Output time is adjustable between
0~3 minutes with the default being 1 minute.
To disable door open detection. (Factory default)
To enable door open detection
Alarm output time
To set the alarm output time (0~3 minutes)
Factory default is 1 minute
Keypad Lockout & Alarm Output options. If there are 10 invalid cards or 10 incorrect PIN numbers in a
10 minute period either the keypad will lockout for 10 minutes, or the alarm will operate for 10 minutes, depending
on the option selected below.
Normal status: No keypad lockout or alarm
(factory default)
Keypad lockout enable
Alarm and inside buzzer operate
To remove the alarm
To reset the Door Forced Open Alarm
To reset the Door Propped Open Alarm
Standalone Keypad Installation Instructions
2
User ID number
continuously without exiting programming mode
*
ID number #
New PIN #
2
0000
#
Enter the PIN then press #
* Master code # 4 0~99 # *
0-99 is to set the door relay time 0-99 seconds
6
0
#
6
1
#
5
0~3
#
7
0
# (Factory default setting)
7
1
#
7
2
#
Master Code #
Close the door or Master Code #
Page 5 of 6
# Users can be deleted
Old PIN #
New PIN #
Advertisement
