Mount The Ioem And Rem; Surface Mount; Rail Mount; Install The Weather Shield - Xylem YSI IOEM Safety And Installation Manual

WARNING: The equipment should be positioned so that the power cord can
easily be disconnected.
AVERTISSEMENT: l' é quipement devrait être placé de façon à ce que le cordon
puisse être facile à débrancher.

Mount the IOEM and REM

Select surface or rail mount option. Install the weather shield for outdoor instal-
lations.

Surface Mount

Mount IOEM and REM to any flat surface using mounting brackets. Mounting
brackets and screws are included with IOEM and REM devices.
1. Fasten the mounting brackets to the back of the IOEM and REM with the
mounting screws - figure 3.2.
2. Tighten the screws, securing the brackets to the back of the IOEM and
REM enclosure.
3. Fasten the IOEM and REM mounting brackets to the mounting surface
with the mounting screws provided - figure 3.2. Make sure screws ad-
equately secure IOEM and REM to surface.
4. Tighten the screws, securing the IOEM and REM to the surface.
Figure 3.2
IOEM/REM Safey and Installation Guide
Installation and Wiring
26

Rail Mount

Mount IOEM and REM to handrail or pipe 1 to 1.5" (2.5 to 3.8cm) in diameter.
The rail mount kit (YSI model number 6509) includes u-bolts, a pre-drilled metal
plate, washers, and nuts.
Drill holes in the mounting brackets to fit the u-bolts. Use the pre-drilled
1.
metal plate as a template.
2. Fasten the mounting brackets to the back of the IOEM and REM with the
mounting screws as shown in figure 3.2.
3. Tighten the screws, securing the brackets to the IOEM and REM.
4. Place the u-bolts around the rail securing the IOEM and REM to the pipe
or rail by feeding through the pre-drilled holes on the mounting brackets
as shown in figure 3.3.
5. Secure the metal plate over the u-bolts and around the rail or pipe using
washers and nuts provided.
6. Tighten the screws, securing the IOEM and REM to the rail.
Figure 3.3

Install the Weather Shield

Install the weather shield for outdoor installations. The weather shield can be used
with either a surface or a rail mount. The weather shield kit includes a weather
shield, u-bolts, pre-drilled metal plate, washers, and nuts.
IOEM/REM Safey and Installation Guide
Installation and Wiring
27