WLAN card
Removing the WLAN card
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
front
bezel.
4. Remove the
2.5 in. hard drive
About this task
The following images indicate the location of the wireless card and provide a visual representation of the removal procedure.
Steps
1. Remove the single (M2x3) screw that secures the metal bracket over the WLAN card to the system board.
2. Slide and lift the WLAN card bracket away from the WLAN card.
3. Disconnect the antenna cables from the WLAN card.
4. Slide and remove the WLAN card from the connector on the system board.
34
Field service information
before working inside your
assembly.
computer.
Need help?
Do you have a question about the OptiPlex 7080 Small Form Factor and is the answer not in the manual?
Questions and answers