Solid-State Drive; Removing The M.2 2230 Pcie Solid-State Drive - Dell OptiPlex 7080 Small Form Factor Service Manual

Steps
1. Align the hard-drive with the notches on the bracket and place the hard-drive onto it.
2. Pull the tabs on the right side of the bracket until the hard-drive clicks into place.
Next steps
1. Install the 2.5 in. hard drive
2. Install the front bezel.
3. Install the side cover.
4. Follow the procedure in

Solid-state drive

Removing the M.2 2230 PCIe solid-state drive

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
4. Remove the 2.5 in. hard drive
About this task
The following images indicate the location of the solid-state drive and provide a visual representation of the removal procedure.
assembly.
after working inside your computer.
before working inside your
assembly.
computer.
Field service information 27