Table of Contents
Advertisement
13
4.4.
Input phase specifications for external VD/HD signal
External VD
(Falling)
External VD
(Rising)
External HD
Set the phase relationship for external VD and HD signals as shown in the above figure.
Note that inputs other than those specified above can cause unstable internal reset.
For normal shutter mode
Continuous VD/HD signals
For restart/reset mode / non-reset mode / reset mode
Continuous HD signal. Arbitrary timing for VD signal with the phase relationship between VD and HD within the above
specifications
4.5.
WEN output specifications
495H (All pixels read)
242H (binning ON)
302H (1/2High-rate scanning)
208H (1/4High-rate scanning)
Amplitude levels are representative values when the output terminates at 10 k.
100
100
5
100
1 clk = 33.333 nsec / 66.666nsec
13/36
Units: Clock
(60fps)
(30fps)
4.5 V
0 V
PRIMETECH ENGINEERING
Advertisement
Table of Contents
