Overview; Characteristics - Primetech PXA30SHP Operation Manual

6

1. Overview

This operation manual describes functions and procedures for the industrial analog camera (B/W).
1.1.

Characteristics

• Diverse mode setting
The following settings can be used by toggling the switch on the rear panel.
• Synchronous input/output
• Shutter speed
• Shutter function: Normal/triggered shutter
• 60fps/30fps switchable
• 1/2 High-rate scanning mode
• 1/4 High-rate scanning mode
• Binning Mode
• Gain control
• 75 Ω termination
• External synchronization
Depending on a VD or HD signal input, the camera operates with external synchronization.
• Internal synchronizing signal output
Synchronizing signals (VD, HD) can be output via the 12-pin connector by toggling the switch on the rear panel.
• External triggered shutter function
A still image can be obtained by inputting a trigger. It allows stable capture of an object that moves at high speed.
• Restart/reset function
CCD images can be accumulated according to the length between VD pulses by continuously inputting synchronizing
signals (VD, HD) from an external device.
It is effective for long-time exposure. (2VD or more)
• Camera module fixing
The screw holes for fixing the camera module are located on the lower surface of the front panel that includes the CCD
reference plane. Fixing the camera module on the front panel can minimize deviation of the optical axis.
• Complies with the new 12-pin EIAJ assignment
6/36
PRIMETECH ENGINEERING