At+Cwmode_Cur - Current Wifi Mode - Espressif Systems ESP8266 At Instruction Set
Hide thumbs
Also See for ESP8266:
- At instruction set (76 pages) ,
- Beginner's manual (55 pages) ,
- Getting started manual (38 pages)
Table of Contents
Advertisement
Espressif Systems
!
!
2.
AT+CWMODE_CUR – current WiFi mode
There are three WiFi working modes: Station mode, softAP mode, and the co-existence of Station
mode and softAP mode. This command is used to acquire the existing WiFi mode, or to set a
customised WiFi mode.
AT+CWMODE_CUR – Set WIFI mode（sta/AP/sta+AP）, won't save to Flash
Example
AT+CWMODE_CUR=3
Command
AT+CWMODE_CUR=?
+CWMODE_CUR:( value scope of <mode>)
Response
OK
<mode>1
Parameters
<mode>2
<mode>3
Command
AT+CWMODE_CUR?
+CWMODE_CUR:<mode>
Response
OK
<mode>1
Parameters
<mode>2
<mode>3
Command
AT+CWMODE_CUR=<mode>
Response
OK
<mode>1
Parameters
<mode>2
<mode>3
Notes
This configuration will
Espressif Systems Confidential
!
means Station mode
means softAP mode
means AP + Station mode
means Station mode
means softAP mode
means AP + Station mode
means Station mode
means softAP mode
means AP + Station mode
not
18 54
/
ESP8266
store in Flash.
AT Instruction Set
Friday, May 22, 2015
Advertisement
Table of Contents
Need help?
Do you have a question about the ESP8266 and is the answer not in the manual?
Questions and answers