Commands; At+Cwmode - Wifi Mode - Espressif Systems ESP8266 At Instruction Set

Espressif Systems
! !
4.1.

Commands

1. AT+CWMODE – WiFi mode
The function of this AT command is to get the value scope of WiFi mode, including station mode,
softAP mode, and station+softAP mode, enquiry about the information of WiFi mode, or set the WiFi
mode.
AT+CWMODE – WiFi mode
[@deprecated]. Please use AT+CWMODE_CUR or AT+CWMODE_DEF instead.
Command
AT+CWMODE=?
+CWMODE:( value scope of <mode>)
Response
OK
Parameters
Please refer to AT command settings.
Command
AT+CWMODE?
+CWMODE:<mode>
Response
OK
Parameters
Please refer to AT command settings.
Command
AT+CWMODE=<mode>
Response
OK
<mode>1
Parameters
<mode>2
<mode>3
This setting will be stored in the flash system parameter area. It won't
Notes
be erased even when the power is off and restarted.
Espressif Systems Confidential
!
means Station mode
means softAP mode
means AP + Station mode
17 54 /
ESP8266
AT Instruction Set
Friday, May 22, 2015