Advertisement
5.6.
Scheduled maintenance table
Maintenance
Daily
•
Operations
Drain condensation
Check oil level
Clean intake filter
Check for oil leaks
Check cut-out
Replace oil
General cleaning of
compressor
Internal & external
inspection of tank
Replace air filter
Check tube fittings and
electrical connections
6.
TROUBLESHOOTING
Fault
Pressure drop in the tank
Pressure switch valve leaks when compressor is idle
Compressor stops and does not restart
Compressor does not stop at max. pressure
Compressor does not stop at max. pressure
Compressor noisy with metallic knock
7.
DECLARATION OF CONFORMITY
Declaration of Conformity We, the sole UK importer, declare that the product listed below is in conformity with the following
standards and directives.
DIRECT DRIVE COMPRESSOR
Model: SA2225/1.5.V2
87/404/EEC Pressure Vessel Directive
89/336/EEC EMC Directive
73/23/EEC LV Directive
98/37/EC Machinery Directive
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this equipment
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
100 hrs.
200 hrs.
500 hrs.
•
•
•
•
•
•
•
•
•
Air leaks at connections
Non-return valve seal defective
Head gasket or valve fault
Bearing or piston damage
Sole UK Distributor,
Sealey Group,
Bury St. Edmunds, Suffolk.
5.7.
Recommended oils
Recommended oil for compressors, suitable for room
temperatures ranging from +5
SEALEY CPO or equivalent SAE 40 compressor oil.
Room temperature below +5
Approximate oil capacity: 0.25 litres.
Cause
Motor failure
Pressure switch fault
Filter clogged
The construction file for this product is held by the manufacturer
and may be inspected, by a national authority, upon request
to Jack Sealey Ltd.
Signed by Mark Sweetman
For Jack Sealey Ltd. Sole UK importer of Sealey Power Products.
01284 757500
01284 703534
C to +25
O
C: SAE 20 compressor oil.
O
fig. 5
Remedy
Run compressor to max. pressure, switch off.
Brush soap solution over connections and look for
bubbles. Tighten connections showing leaks.
If problem persists contact Authorised Service Agent.
Empty the air tank, remove the non-return valve cap
‘E’ (fig.5) and clean, or if necessary replace,
the seal ‘D’.
Contact Authorised Service Agent.
Contact Authorised Service Agent.
Replace filter element.
Contact Authorised Service Agent.
Contact Authorised Service Agent.
1st February 2005
www.sealey.co.uk
Web
sales@sealey.co.uk
e-mail
SA2225/1.5.V2 - 1 - 010205
C.
O
Advertisement
