Subaru BRZ 2017 Owner's Manual page 456

5-2. Steps to take in an emergency
STEP 15
Turn the switch "OFF" when the pressure gauge connected to
STEP 16
the hose reads the specified pressure.
If the inflation pressure is not attained within 10 minutes, emergency
repair is not possible due to severe damage. We recommend that
you contact any authorized SUBARU dealer or repairer, or another
duly qualified and equipped professional.
After completely filling the tire with air, disconnect the hose
STEP 17
from the valve on the tire and pull the power plug of the com-
pressor out of the power outlet on the vehicle.
To spread the liquid sealant evenly in the tire, immediately
STEP 18
drive for about 10 minutes.
STEP 19
456
Turn the compressor switch "ON"
and fill the tire with air until the
specified inflation pressure is
reached.
Switch
After driving about 10 minutes,
pull your vehicle over in a safe
place and reconnect the com-
pressor.