Subaru BRZ 2017 Owner's Manual page 268

3-2. Using the audio system
Scanning radio stations
■
Scanning the preset radio stations
Press and hold
STEP 1
Preset stations will be played for 5 seconds each.
When the desired station is reached, press the button once
STEP 2
again.
■
Scanning all radio stations within range
Press
STEP 1
All stations with reception will be played for 5 seconds each.
When the desired station is reached, press the button once
STEP 2
again.
■
When the battery is disconnected
Stations presets are erased.
■
Reception sensitivity
●
Maintaining perfect radio reception at all times is difficult due to the con-
tinually changing position of the antenna, differences in signal strength
and surrounding objects, such as trains and transmitters.
●
When
●
The radio antenna is mounted on the rear roof. The antenna can be
removed from the base by turning it.
268
until you hear a beep.
.
is used, automatic station selection may not be possible.