Subaru BRZ 2017 Owner's Manual page 374

4-3. Do-it-yourself maintenance
WARNING
■ When initializing the tire pressure monitoring system (if equipped)
Do not operate the tire pressure monitoring reset switch without first
adjusting the tire inflation pressure to the specified level. Otherwise, the
tire pressure warning light may not come on even if the tire inflation pres-
sure is low, or it may come on when the tire inflation pressure is actually
normal.
CAUTION
■ Repairing or replacing tires, wheels, tire pressure warning valves,
transmitters and tire valve caps (vehicles with a tire pressure moni-
toring system)
● When removing or fitting the wheels, tires or the tire pressure warning
valves and transmitters, contact any authorized SUBARU dealer or
repairer, or another duly qualified and equipped professional as the tire
pressure warning valves and transmitters may be damaged if not han-
dled correctly.
● When replacing tire valve caps, do not use tire valve caps other than
those specified. The cap may become stuck.
■ To avoid damage to the tire pressure warning valves and transmit-
ters (vehicles with a tire pressure monitoring system)
When a tire is repaired with liquid sealants, the tire pressure warning
valve and transmitter may not operate properly. If a liquid sealant is
used, contact any authorized SUBARU dealer or repairer, or another
duly qualified and equipped professional or other qualified service shop
as soon as possible. After use of liquid sealant, make sure to replace the
tire pressure warning valve and transmitter when repairing or replacing
the tire. (→P. 366)
374