Easygate Umts Data Status Indication; Indication Leds; Telephone Line Tones - 2N EASYGATE UMTS Manual

ООО "СИМЭНЕРГО" Tel: 8-800-250-77-25 Tel: +7 8442 98-77-25 ICQ: 832220 WWW.SIMENERGO.COM

3. EasyGate UMTS Data Status Indication

3.1. Indication LEDs

Name
Power supply
UMTS/GSM
network
Telephone line

3.2. Telephone Line Tones

3.2.1. Operational Tones
EasyGate UMTS Data sends tones to the telephone line to indicate the line status.
Dial tone: continuous or Morse A :
• EasyGate UMTS Data is registered to UMTS/GSM network and ready to receive
dialing.
Ringing tone:
• The called subscriber's telephone is ringing.
• The UMTS/GSM network transmits this tone.
Busy tone:
The busy tone is transmitted in any of the following cases:
§
§ The USIM card has not been installed.
EasyGate UMTS Data is logged-out.
§
EasyGate UMTS Data is logged-in to a foreign network but roaming is
§
disabled.
The called number has too many digits (more than 30).
§
The called number is barred.
§
The called subscriber line is busy.
§
The called subscriber has hung up (disconnection).
§
Meaning
• Light = EasyGate UMTS Data is powered.
• Flashes once in 2s = HW error, contact the manufacturer.
• Light = registered to UMTS/GSM
• Flashes once in 1s = not registered, USIM card inserted
• Flashes once in 3s = not registered, USIM card not
inserted
• Flashes 4 times quickly = enter your PIN
• Flashes 8 times quickly = enter your PUK
•
Flashes quickly continuously = all functions are blocked.
Your USIM doesn't correspond to the operator lock
• No light = standby
• Flashes quickly = seized line or ringing
•
Light = call
9