Table of Contents
Advertisement
Make sure the VTR power is turned OFF.
Remove the part
screws.
Remove the part
Insert the supplied Video In circuit board into the part marked
with F3.
Pull out the printed circuit board marked with F6.
After inserting the supplied Video Out Sub circuit board into the
connector of F6 circuit board, secure it with the 3 screws.
Return the F6 circuit board with Video Out Sub circuit board back
to the original position, then fix it to main unit by tightening the
screws of parts
Specifications
Analog component input:
Y:
: AJ-YA950/952; 0.525/0.757 Vp-p selectable,75 Ω
P
/P
B
R
AJ-YA951E;
Analog composite input:
Analog component output:
Y:
: AJ-YA950/952; 0.525/0.757 Vp-p selectable,75 Ω
P
/P
B
R
AJ-YA951E;
Circuit boards contained in the package
Circuit boards (2 pcs)
Video In circuit board
(F3)
Video Out Sub circuit
board
from main unit of the VTR by loosening the 2
by loosening the screw.
and
in order.
BNC 3 (Y, P
1.0 Vp-p, 75 Ω
0.7 Vp-p, 75 Ω
BNC 2, loop-through,
75 Ω ON/OFF selectable
BNC 3 (Y, P
1.0 Vp-p, 75 Ω
0.7 Vp-p, 75 Ω
Weight
265 g
285(W)
125 g
235(W)
3
, P
)
B
R
, P
)
B
R
Dimensions
148(H)
25(D) mm
116(H)
20(D) mm
Advertisement
Chapters
Table of Contents
